Dear Frank, So you mean, you built your ML403 system with U-Boot supported according to the updated version of xapp542, right? There are NOT some patches open to everyone to include ML403 support into the U-Boot tree, right?
If both answers for the two questions are yes, then I have to contact Xilinx to ask for help. Anyway, thanks for your information and reply. Regards Ming >From: Frank D Lombardo <lombardo at mdivac.com> >To: Ming Liu <eemingliu at hotmail.com> >CC: linuxppc-embedded at ozlabs.org >Subject: Re: U-boot on ML403 >Date: Fri, 11 Aug 2006 11:14:23 -0400 > >Ming Liu wrote: > > Dear Frank, > > I know you are using U-boot on ML403 now. So can you say something > > about how to configure U-boot as ML403 board? I noticed that in U-boot > > 1.1.4, there is only ML300 supported. So if I want to configure the > > board as ML403 and some other customed options(e.g. no EEPROM), what > > shall I do? Thanks for your help. > > > > Regards > > Ming > > > >Ming, > >I received an updated version of the Xilinx xapp542 directly from >Xilinx. We had to sign a non-disclosure agreement before they would send >it to me. This update provided the necessary pieces to allow XPS to >generate a U-Boot "BSP" and a modified U-Boot tree with support for >additional mlXXX boards. > >I would recommend contacting Xilinx for this. Sorry I can't be of >greater assistance. > >Frank > _________________________________________________________________ ?????????????? MSN Messenger: http://messenger.msn.com/cn
