Hi,
I have a custom PowerPC board (IBM 405 Based) with USB - OHCI compliant
controller on OPB bus. I have taken SA1111 usb driver as a refernce and
enabled USB. The root hub got initialised and
cat /proc/bus/usb/devices outputs
"?T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=
"?B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
"?D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxP
"?P: Vendor=0000 ProdID=0000 Rev= 0.00
"?S: Product=USB OHCI Root Hub
"?S: SerialNumber=ef601200
"?C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
"?I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00
"?E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
but, there is no change in interrupts when I connect a USB device.
cat /proc/interrupts output is
CPU0
2: 119608 405IAP UIC Edge NE2000
11: 1 405IAP UIC Edge usb-ohci
29: 604 405IAP UIC Edge keyboard
BAD: 0
Also, whatever device I connect, it does not get listed in
/proc/bus/usb/devices
Could anybody please tell me as to where the problem is regarding the
interrupts.
Any help or suggestion would be very helpful....
Thank you for your time....
regards,
Nageswari
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
