Hi Everyone, I have been trying to get the linux-2.6.20-rt3 for arch/powerpc to boot on my lite5200b. Here are the things that I have tried so far. I have a custom board based on the lite5200b and then the evaluation board too.
- I have a working 2.6.16-rt29 kernel compiled using ARCH=ppc for both these boards. - I tried the default configs for lite5200 for both the custom board and the EVB. Both hang at "Transferring control to Linux (at address 00000000) ..." - I downloaded roberts http://www.pengutronix.de/oselas/bsp/phytec/index_en.html#phyCORE-MPC5200B-tiny patches, but still ended up with the same result. I read ( http://www.nabble.com/Re%3A-MPC52xx-support-rework-for-2.6.20-p7568655.html ) that the arch/powerpc port for lite5200 works right out of the box. Am I doing something wrong ? The one thing I am yet to try is to do a git checkout from git.secretlabs.ca. Unfortunately thanks to some internal firewalling policies I still have not been able to do that. Thanks in advance regards prady _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
