Hi everyone, I recently got a few Force/Motorola PowerPMC-280 PMC modules consisting mainly of a MPC7447 G4 an the Marvell MV64360 system controller. Since this a hobbyist project only I don't have Montavista Linux which seems to already support the board. Instead I ported the stock Linux kernel. Works quite well so far. The only thing I did not get to work is the integrated ethernet. The mv64360_eth driver loads fine and sees both ports. It does not get any interrupts for incoming packets (activity led blinks though). Only unplugging the cable generates an interrupt.
Since I do not have any documentation on the Marvell chip and the company does not answer my request I am quite lost. The PHY interrupts are routed to one of the GPIO/interrupt pins. I did not find any code in the ethernet driver that would be able to use it though. Is it needed at all? Any hint is appreciated! Sebastian _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
