Hello all I'm new to this list, so please be gentle ;) I've been working on vxWorks (5-6) for a few years on powerquicc CPUs. I wanted to check the option of moving to linux, I have a windriver sbc8349 evb, which I would like to boot linux on. - I downloaded crosstool, and am building the ppc603 toolchain (is that OK ? or is there some better toolchain ?) - Where do I go now ? I downloaded the latest kernel from kernel.orgmn and... I am quite ok on linux, yet never cross-compiled or brought-up a board based on some flavor of linux.. I have searched the web for information, but the sources of knowledge are quite sparse and not helpfull.. Can someone please point me to a starting point, so that I can at least flash a bootloader to the board, with some sort of BSP, so that I can see at least some linux prompt on the serial port ? ;) Thanks in advance. Sinan.. Notice: This e-mail and accompanying files contain confidential information, belonging to the sender that is legally privileged. This information is intended only for use by the individual or entity designated. The authorized recipient of this information is prohibited from disclosing the information to any other party and is required to destroy the information after its stated need has been fulfilled. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of these documents is strictly prohibited. If you have received this copy in error, please notify the sender immediately and destroy all copies of this information, including any attachments, without reading or disclosing them. Thank You
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
