Stephen Neuendorffer,
Thank you very much. I am using MVL3.1 (2.4 kernel),I only need the
function of playback.Could you send a copy of your driver to [EMAIL PROTECTED]
I am so lucky to meet you.
Yunfei Zhang
MediaSoC Lab. @IC &System Center of SJTU
Yunfei Zhang
2006-12-09
发件人： Stephen Neuendorffer
发送时间： 2006-12-09 03:14:30
收件人： Yunfei Zhang
抄送：
主题： RE: AC'97 driver on MontaVista Linx for Xilinx ML403 board
Yunfei,
I have a very simple AC97 driver for the XUPV2P board, which would likely work
on the ML403, using the opb_ac97 core
here: http://www.xilinx.com/univ/xupv2p.html
Currently, the timing constraints are rather tight, since the core doesn't use
DMA and the buffers are relatively small.
However, I would be happy to share it with you. Are you using MVL3.0 (2.4
kernel) or MVL4.0 (2.6 kernel)?
Stephen Neuendorffer
Xilinx Research Labs.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yunfei Zhang
Sent: Friday, December 08, 2006 12:00 AM
To: [email protected]
Subject: AC'97 driver on MontaVista Linx for Xilinx ML403 board
Hi All,
I am porting a audio decoder to ML403 board, but I find there is no AC'97
driver supported. I am not familiar with the linux driver for powerpc. Could
someone give me a copy of AC'97 diver which is compatible for ML403 board or
PPC405.If there is none, could you tell me what could I do to alter certain
copies or any suggestions.
Thanks for all your kindness.
Yunfei Zhang
2006-12-08
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
