Hi all: I got BDI2000 today, tring to use to to debug my MMU problem. But after I hooked it up and issue "reset", the following messages are printed out:
BDI>reset - BDI asserts HRESET - Reset JTAG controller passed - Bypass check: 0x00000001 => 0x00000001 - JTAG exists check passed - COP status is 0x01 - Check running state passed - BDI scans COP freeze command - BDI removes HRESET - Target PVR is 0x80822013 - Target SVR is 0x00000000 - COP status is 0x05 - Check stopped state passed - Check LSRL length passed - BDI sets breakpoint at 0xFFF00100 - BDI resumes program execution - Waiting for target stop passed It didn't process the init list, the IMMR still shows the default value, instead of the one specified in init list. The weird thing is , if it didn't process init list, it should keep resetting because of the watch dog timmer, I didn't see that happen as well. My target is mpc8270, the BDI firmware version is 1.24 logic 1.05 Any one had the similar experience ? Thanks lei _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
