With 0.865 the error message is better. It states the problem more clearly. However the substantive problem is still there. For whatever reason the changes introduced with 0.860 broke the MiniUPnP with my device. So I have gone back to 0.851 which is able to communicate with the uPnP. This version of the MiniUPnP library doesn't work with some equipment that the old version did work with. Given that the hardware I am using is that supplied by BT infinity this is going to be affecting quite a lot of people with fast internet (fibre to the cabinet) in the UK.
-- You received this bug notification because you are a member of Dcplusplus-team, which is subscribed to DC++. https://bugs.launchpad.net/bugs/1644512 Title: UPnP configuration no longer working Status in DC++: New Bug description: I have a BT Homehub 3 with an openreach fibre modem to connect to the BT infinity FTTC service. The previous version of DC++ (0.851) could talk to the mini MiniUPnP interface and set up an active connection. The system log in 0.851 is like this [21:23] Connectivity: Determining the best connectivity settings... [21:23] Connectivity: Local network with possible NAT detected, trying to map the ports... [21:23] Connectivity: Port mapping: Successfully created port mappings (Transfers: 15509, Encrypted transfers: 15510, Search: 51248) on the "WANDevice" device with the MiniUPnP interface [21:23] Connectivity: Port mapping: Failed to get external IP [21:25] File list <C:\Users\Brett\AppData\Roaming\DC++\files.xml.bz2> generated [21:26] Connectivity: Port mapping: Successfully removed port mappings from the "WANDevice" device with the MiniUPnP interface [21:26] Connectivity: Determining the best connectivity settings... [21:26] Connectivity: Local network with possible NAT detected, trying to map the ports... [21:26] Connectivity: Port mapping: Successfully created port mappings (Transfers: 15542, Encrypted transfers: 15543, Search: 50056) on the "WANDevice" device with the MiniUPnP interface [21:26] Connectivity: Port mapping: Failed to get external IP An active connection is successfully configured. The system log in 0.863 is like this [10:44] Connectivity (IPv4): Determining the best connectivity settings... [10:44] Connectivity (IPv4): Local network with possible NAT detected, trying to map the ports... [10:44] Connectivity (IPv6): Determining the best connectivity settings... [10:44] Connectivity (IPv6): All IPv6 addresses found are local; disabling connectivity [10:44] Connectivity (IPv4): Port mapping: Failed to initialize the MiniUPnP interface [10:44] Connectivity (IPv4): Port mapping: Failed to map the Transfer port (19386 TCP) with the NAT-PMP interface [10:44] Connectivity (IPv4): Port mapping: Failed to create port mappings [10:44] Connectivity (IPv4): Active mode could not be achieved; a manual configuration is recommended for better connectivity [10:45] File list <C:\Users\Brett\AppData\Roaming\DC++\files.xml.bz2> generated I get only a passive connection. I have been reverting to 0.851 due to this. To manage notifications about this bug go to: https://bugs.launchpad.net/dcplusplus/+bug/1644512/+subscriptions _______________________________________________ Mailing list: https://launchpad.net/~linuxdcpp-team Post to : linuxdcpp-team@lists.launchpad.net Unsubscribe : https://launchpad.net/~linuxdcpp-team More help : https://help.launchpad.net/ListHelp
