New question #220594 on ADCH++: https://answers.launchpad.net/adchpp/+question/220594
Hello all I have used ADCH++ for a while now for 2 hubs and have this problem with massive crashes on one of the hubs. And im not sure why exactly this is happening or more why it happens... The one hub crashes quite often and the only thing i can do to stop it, or reduce it abit is to enable "flood protect" in ADCH++. With the result that users get kicked with this message: You are kicked: For hammering the hub too often (20 times) with the CTM command ! They hammer the hub with +400 times per minute :( Its not all users, but a handful... But i dont understand why this is happening. There are lots of theories from people ive spoken with. Some say its a client problem (ALL users use AirDC 2.42 in the hub), other that it could be a "Cross hammering" problem between 2 hubs? I would be very happy if some could help me out with this problem :) More about the hubs and the system: 2 hubs running ADCH++ 2.9 with 108 PtokaX-ADCH++ bridge. They are on the same network (LAN) but difrent WANs Both WAN lines have connected users sitting on both the hubs. Hope this help :) Regards -- You received this question notification because you are a member of Dcplusplus-team, which is an answer contact for ADCH++. _______________________________________________ Mailing list: https://launchpad.net/~linuxdcpp-team Post to : linuxdcpp-team@lists.launchpad.net Unsubscribe : https://launchpad.net/~linuxdcpp-team More help : https://help.launchpad.net/ListHelp
