Just remind: His MB has E7501 ....
So first step is make freebios2 work on that. He may need to copy Tyan S2735 to make his MB copy at first. Then he ..... Regards YH -----Original Message----- From: Ronald G. Minnich [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 27, 2004 12:11 PM To: Steve Kimball Cc: Gin; [EMAIL PROTECTED] Subject: Re: boot linux from an ide On Wed, 27 Oct 2004, Steve Kimball wrote: > To use FILO or Etherboot you change the payload. > So you need to change the > freebios2/targets/<vendor>/<board>/Config.lb > file to point to the FILO or Etherboot payload > and make linuxbios.rom. don't forget you can make your own! I have targets/arima/hdama/Config.filo.lb and I do this: ./buildtarget arima/hdama/Config.filo.lb File is this: # Sample config file for the Arima HDAMA target hdama.filo mainboard arima/hdama romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" payload /opt/filo/normal/filo.elf end romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" payload /opt/filo/fallback/filo.elf end buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
