Hi All,
I want to help the "Allwinner V5" bsp development. Can I know where can
i buy the board.
Thanks.
[email protected] 在 2022年4月19日 星期二清晨6:40:30 [UTC+8] 的信中寫道：
> Hey all,
>
> I'm trying to upstream support for the Allwinner V5 using the Lindenis V5
> SBC <http://wiki.lindeni.org/index.php/Lindenis_V5>. I hope to eventually
> build a completely open source stereo camera board using the SOC. Before
> building the hardware I want to ensure I can provide proper support for
> building images in Buildroot. The vendor's BSP is a really old fork of
> uboot and Linux (2014), I've been merging some parts from the forks.
>
> This is what I've done so far.
>
> 1. Pulled in the sun8iw12p1-*.dts from forks. Files here
> <https://pastebin.com/raw/N7HxS8Zm>.
> 2. Took genimage.cfg from board/olimex/a33_olinuxino/genimage.cfg
> 3. Several u-boot patches here <https://pastebin.com/raw/DdFppeM0>,
> 1. Merging in cpu_sun8i.h from the vendor fork
> 2. Snubbing out functions in arch/arm/cpu/armv7/sunxi/psci.c
> 3. Added the board aliased against some CONFIG_MACH_SUN50I_H6
> config. As the H6 is a similar chip.
> 4. Took board/interruptlabs/stereo/lindenis_v5_defconfig from the
> vendor linux fork.
>
> Here is the entire diff <https://pastebin.com/raw/TvfP7HAu>.
>
> I've created a sdcard image, flashed it, and powered it up but nothing
> yet. I would really appreciate any guidance, documents or feedback on this
> task. Thanks!
>
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/be08c491-238c-4dea-9eb2-558bd5cef6ecn%40googlegroups.com.
