Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.
Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.
Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS
SD card")
Reported-by: Ashley <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
---
Hi,
sorry, that slipped through my testing. I verified that the CD switch worked,
but didn't actually boot Linux on the SOPine baseboard.
Thanks to Ashley for the heads up!
Cheers,
Andre
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 4 ++++
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 437ffe3628a5..e79ce49e7e6a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -19,3 +19,7 @@
};
};
};
+
+&mmc0 {
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 3402cec87035..df62044ff7a7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -34,7 +34,7 @@
vmmc-supply = <®_dcdc1>;
disable-wp;
bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
status = "okay";
};
--
2.17.5
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/20210316144219.5973-1-andre.przywara%40arm.com.
