Hi Gediz, I followed the wiki, checked out from git repo, installed required deps and built sunxi tools successfully. Then I was able to put the device in FEL mode by keeping the button pressed when plugging the usb. This is the output I get from running sudo ./sunxi-fel version AWUSBFEX soc=00001623(A10) 00000001 ver=0001 44 08 scratchpad=00007e00 00000000 00000000
But attempts to read anything from it are failing with time out. sudo ./sunxi-fel read 0x42400000 0x82d0 boot1.header sudo ./sunxi-fel read 0x43000000 0x20000 script.bin The exact error message is: usb_bulk_send() ERROR -7: Operation timed out What could be the cause of this ? On Wed, Sep 9, 2020 at 4:27 PM Nazım Gediz AYDINDOĞMUŞ < [email protected]> wrote: > Hello Adrian, > > It looks like a cool device. > > I think you may be able to dump the original firmware using > "spiflash-read" command of the sunxi-fel tool after you boot the device > into the FEL mode. > > By the way, some of the information there is outdated but the rest may > be useful in the following wiki page: > http://linux-sunxi.org/Retrieving_device_information > > Regards, > Gediz > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAAuDtmfOh24jVghpqCFsyb273XuW7QSe4oG1E6%2B0DRfq_PYRgw%40mail.gmail.com.
