For some reason, A64 and H6 have swapped clocks and resets definitions. H6 doesn't have rotation unit while A64 has. Swap around to correct the issue.
Signed-off-by: Jernej Skrabec <[email protected]> --- drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c index d9668493c3f9..08074d935317 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c @@ -51,7 +51,7 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4, static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4, CLK_SET_RATE_PARENT); -static struct ccu_common *sun50i_h6_de3_clks[] = { +static struct ccu_common *sun50i_a64_de2_clks[] = { &mixer0_clk.common, &mixer1_clk.common, &wb_clk.common, @@ -156,7 +156,7 @@ static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = { .num = CLK_NUMBER_WITHOUT_ROT, }; -static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = { +static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = { .hws = { [CLK_MIXER0] = &mixer0_clk.common.hw, [CLK_MIXER1] = &mixer1_clk.common.hw, @@ -190,13 +190,13 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] = { [RST_MIXER0] = { 0x08, BIT(0) }, [RST_MIXER1] = { 0x08, BIT(1) }, [RST_WB] = { 0x08, BIT(2) }, + [RST_ROT] = { 0x08, BIT(3) }, }; static struct ccu_reset_map sun50i_h6_de3_resets[] = { [RST_MIXER0] = { 0x08, BIT(0) }, [RST_MIXER1] = { 0x08, BIT(1) }, [RST_WB] = { 0x08, BIT(2) }, - [RST_ROT] = { 0x08, BIT(3) }, }; static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = { @@ -220,20 +220,20 @@ static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = { }; static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = { - .ccu_clks = sun8i_h3_de2_clks, - .num_ccu_clks = ARRAY_SIZE(sun8i_h3_de2_clks), + .ccu_clks = sun50i_a64_de2_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_a64_de2_clks), - .hw_clks = &sun8i_h3_de2_hw_clks, + .hw_clks = &sun50i_a64_de2_hw_clks, .resets = sun50i_a64_de2_resets, .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets), }; static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = { - .ccu_clks = sun50i_h6_de3_clks, - .num_ccu_clks = ARRAY_SIZE(sun50i_h6_de3_clks), + .ccu_clks = sun8i_h3_de2_clks, + .num_ccu_clks = ARRAY_SIZE(sun8i_h3_de2_clks), - .hw_clks = &sun50i_h6_de3_hw_clks, + .hw_clks = &sun8i_h3_de2_hw_clks, .resets = sun50i_h6_de3_resets, .num_resets = ARRAY_SIZE(sun50i_h6_de3_resets), -- 2.25.0 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200124232014.574989-2-jernej.skrabec%40siol.net.
