From: Jernej Skrabec <[email protected]> Now that sun4i PWM driver supports deasserting reset line and enabling bus clock, support for H6 PWM can be added.
Note that while H6 PWM has two channels, only first one is wired to output pin. Second channel is used as a clock source to companion AC200 chip which is bundled into same package. Signed-off-by: Jernej Skrabec <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Signed-off-by: Clément Péron <[email protected]> --- drivers/pwm/pwm-sun4i.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index 0fe9c680d6d0..84f3ccab47f9 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -360,6 +360,12 @@ static const struct sun4i_pwm_data sun4i_pwm_single_bypass = { .npwm = 1, }; +static const struct sun4i_pwm_data sun50i_h6_pwm_data = { + .has_prescaler_bypass = true, + .has_direct_mod_clk_output = true, + .npwm = 2, +}; + static const struct of_device_id sun4i_pwm_dt_ids[] = { { .compatible = "allwinner,sun4i-a10-pwm", @@ -376,6 +382,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = { }, { .compatible = "allwinner,sun8i-h3-pwm", .data = &sun4i_pwm_single_bypass, + }, { + .compatible = "allwinner,sun50i-h6-pwm", + .data = &sun50i_h6_pwm_data, }, { /* sentinel */ }, -- 2.20.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20191121195902.6906-7-peron.clem%40gmail.com.
