> + Increases the voltage by 1.6 mV per uS until the final voltage has
> + been reached. Note that the scaling is in 25 mV steps and thus
> + the slew rate in reality is about 25 mV/31.250 uS.
[...]
> + Increases the voltage by 0.8 mV per uS until the final voltage has
> + been reached. Note that the scaling is in 25 mV steps however and thus
> + the slew rate in reality is about 25 mV/15.625 uS.
> + This is the slowest supported rate.
The numbers 31.25 and 15.625 should be swapped, IIUC.
Stefan
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
