According to Jens disabling the on-die-termination should set bit 5, not bit 1 in the respective register. Fix this.
Reported-by: Jens Kuske <[email protected]> Signed-off-by: Andre Przywara <[email protected]> --- arch/arm/mach-sunxi/dram_sun8i_h3.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-sunxi/dram_sun8i_h3.c b/arch/arm/mach-sunxi/dram_sun8i_h3.c index fe9cf9a..1311eda 100644 --- a/arch/arm/mach-sunxi/dram_sun8i_h3.c +++ b/arch/arm/mach-sunxi/dram_sun8i_h3.c @@ -414,6 +414,11 @@ static void mctl_sys_init(uint16_t socid, struct dram_para *para) udelay(500); } +/* These are more guessed based on some Allwinner code. */ +#define DX_GCR_ODT_DYNAMIC (0x0 << 4) +#define DX_GCR_ODT_ALWAYS_ON (0x1 << 4) +#define DX_GCR_ODT_OFF (0x2 << 4) + static int mctl_channel_init(uint16_t socid, struct dram_para *para) { struct sunxi_mctl_com_reg * const mctl_com = @@ -443,7 +448,8 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para) clrsetbits_le32(&mctl_ctl->dx[i].gcr, (0x3 << 4) | (0x1 << 1) | (0x3 << 2) | (0x3 << 12) | (0x3 << 14), - IS_ENABLED(CONFIG_DRAM_ODT_EN) ? 0x0 : 0x2); + IS_ENABLED(CONFIG_DRAM_ODT_EN) ? + DX_GCR_ODT_DYNAMIC : DX_GCR_ODT_OFF); /* AC PDR should always ON */ setbits_le32(&mctl_ctl->aciocr, 0x1 << 1); -- 2.8.2 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
