Hey guys I've gotten as far with my board as getting everything working from the SD card. When moving things over to the NAND flash, u-boot won't get my kernel started. It reads script.bin and uImage from nanda, verifies the checksum. Then I see "Starting kernel ..." on the serial console and nothing more. Silence on both UART and graphical console both.
The u-boot is from the lychee-dev-a20 tree. I've tried replacing the boot.axf from the CubieTruck, tried the CubieTruck u-boot.in, and dozens of other combinations. Nothing works. If I start U-boot from the SD card, I am able to set the root to NAND and boot rather cleanly. Anyone else seen this. I used sun7i_config in uboot. Could bad RAM settings in U-boot be breaking the kernel startup? Thanks for your help folks. The sunxi project is awesome - things have never been this smooth for me, especially when using an SoC that isn't well documented like a Marvell, Broadcom or TI. Regards Saurabh -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
