On Saturday, May 14, 2016 at 3:56:55 PM UTC+1, Hans de Goede wrote: > Hi, > > On 14-05-16 16:36, [email protected] wrote: > > On Saturday, May 14, 2016 at 1:39:47 PM UTC+1, Hans de Goede wrote: > >> Hi, > >> > >> On 14-05-16 12:23, [email protected] wrote: > >>> On Saturday, May 14, 2016 at 10:09:49 AM UTC+1, Hans de Goede wrote: > >>>> Hi, > >>>> > >>>> On 14-05-16 00:01, markdamerell via linux-sunxi wrote: > >>>>> > >>>>> I am trying to install sunxi on my tablet, using the > >>>>> procedure in: > >>>>> > >>>>> http://linux-sunxi.org/U-Boot#Compile_U-Boot > >>>>> > >>>>> On my PC running L-Ubuntu 14.04: > >>>>> > >>>>> make CROSS_COMPILE=arm-linux-gnueabihf- Ippo_q8h_config > >>>>> make CROSS_COMPILE=arm-linux-gnueabihf- > >>>>> > >>>>> No error was reported. This produces u-boot.img > >>>>> but *not* spl/sunxi-spl.bin > >>>>> > >>>>> The only file in the spl subdirectory is Makefile > >>>>> > >>>>> I re-tried with a different build bananapi > >>>>> (chosen at random) and this time it built several > >>>>> things in the ..spl subdirectory . > >>>>> > >>>>> then make clean does **not** delete these. > >>>>> cd spl ; make clean produces some errors and > >>>>> I dont think it deletes anything. > >>>>> > >>>>> Please any advice? Thank you. > >>>> > >>>> The Ippo_q8h config has been replaced by generic q8h > >>>> configs, use either: > >>>> > >>>> q8_a13_tablet > >>>> q8_a23_tablet_800x480 > >>>> q8_a33_tablet_800x480 > >>>> q8_a33_tablet_1024x600 > >>>> > >>>> Appended with _defconfig, depending on which describes your tablet best. > >>>> > >>>> Regards, > >>>> > >>>> Hans > >>> > >>> But none of the q8h configs that you mentioned is in the list > >>> of available build targets. If I try one: > >>> > >>> make CROSS_COMPILE=arm-linux-gnueabihf- q8_a23_tablet_800x480_config > >>> make: *** No rule to make target `q8_a23_tablet_800x480_config'. Stop. > >>> > >>> BTW I think I cloned the GIT repository on May 11. > >> > >> You need to use _defconfig, e.g.: > >> > >> make CROSS_COMPILE=arm-linux-gnueabihf- q8_a23_tablet_800x480_defconfig > >> > >> Regards, > >> > >> Hans > > > > I copied that line out of the message into a terminal and got the same > > error: > > > > $ make CROSS_COMPILE=arm-linux-gnueabihf- q8_a23_tablet_800x480_defconfig > > make: *** No rule to make target `q8_a23_tablet_800x480_defconfig'. Stop. > > Works for me: > > [hans@shalem u-boot]$ make CROSS_COMPILE=arm-linux-gnueabihf- > q8_a23_tablet_800x480_defconfig > HOSTCC scripts/basic/fixdep > HOSTCC scripts/kconfig/conf.o > HOSTCC scripts/kconfig/zconf.tab.o > HOSTLD scripts/kconfig/conf > # > # configuration written to .config > # > [hans@shalem u-boot]$ > > Which u-boot git repo are you using, note that the linux-sunxi one is > hopelessly out of date. sunxi support has been in upstream u-boot for > quite a while now, so you should use the official git.denx.de u-boot > repo. > > Regards, > > Hans
Thank you, you have solved my problem. I looked at the list of devices supported by mainline/upstream sunxi & couldnt see anything that looked like my tablet, so I cloned the legacy repo. I have now restarted with the git.denx.de repo * . It compiled and produced the .bin file. Thank you, Mark -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
