The H3 ir receiver is completely compatible with the one found in the A31.
Signed-off-by: Hans de Goede <[email protected]>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 3fdf213..c2f63c5 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -307,6 +307,14 @@
clock-indices = <0>, <1>;
clock-output-names = "apb0_pio", "apb0_ir";
};
+
+ ir_clk: ir_clk@01f01454 {
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01f01454 0x4>;
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "ir";
+ };
};
soc {
@@ -632,6 +640,16 @@
#reset-cells = <1>;
};
+ ir: ir@01f02000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ clocks = <&apb0_gates 1>, <&ir_clk>;
+ clock-names = "apb", "ir";
+ resets = <&apb0_reset 1>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x40>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -642,6 +660,13 @@
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
+
+ ir_pins_a: ir@0 {
+ allwinner,pins = "PL11";
+ allwinner,function = "s_cir_rx";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
};
};
--
2.7.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
