Cable plug/unplug does not create kernel messages. dmesg output does not change.
Has kernel 3.4.90 for Olimex-A20-LIME2 problem? Sencer On Sun, Feb 21, 2016 at 6:44 PM, Diego Roversi <[email protected]> wrote: > On Thu, 18 Feb 2016 02:54:38 -0800 (PST) > Sencer Sultanoğlu <[email protected]> wrote: > > > Hello, > > > > I would like to detect if network cable is plugged or not to > > Olimex-A20-LIME2 eth0 port. I use standart Linux image. Debian 7 kernel > > 3.4.90 > > > > "ethtool eth0" command always displays yes for "link detected" > > > > I tested on a lime with a standard debian image with debian kernel 3.16, > and it works fine. When you plug/unplug cable from ethernet port you should > see messages in kernel log. You can see them with dmesg (and in > /var/log/messages, usually). > > > -- > Diego Roversi <[email protected]> > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
