Hi, On Mon, Oct 12, 2015 at 05:42:10PM +0800, Chen-Yu Tsai wrote: > On Mon, Oct 12, 2015 at 5:30 PM, Maxime Ripard > <[email protected]> wrote: > > Hi, > > > > On Sat, Oct 10, 2015 at 10:49:00PM +0800, Chen-Yu Tsai wrote: > >> +&i2c0 { > >> + /* Available on camera header */ > >> + pinctrl-names = "default"; > >> + pinctrl-0 = <&i2c0_pins_a>; > >> + status = "okay"; > >> +}; > >> + > >> +&i2c1 { > >> + /* Available on LCD header */ > >> + pinctrl-names = "default"; > >> + pinctrl-0 = <&i2c1_pins_a>; > >> + status = "okay"; > >> +}; > > > > Are those two actually used anywhere on the board itself, or just > > exposed on the pin headers? > > They are exposed as grouped headers. 1 header has all the camera > related stuff, like the CSI pins, and various voltage sources > from the PMIC. The other has the LCD pins, resistive touchpanel, > I2C for capacitive touchpanel, and of course voltage sources. > > The LCD header is an FPC connector, while the camera header is > the common (common for sunxi devboards) 2.0mm pins. I'm not sure > if there is some common pinout amongst vendors, but at least > Sinlinx sells their own 7" LCD display w/ CTP, VGA converter, > and camera modules. I have both the LCD and VGA converter. > > Note that these I2C pins have valid external pull-ups. I doubt > they can be easily re-purposed.
Still, the policy we've had so far is that if the user can use it for something else (like a GPIO, which is the case here), we don't do enforce any default, and the user will make the right choice. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: Digital signature
