I have some 24pin flex cable CIF cameras here. They are labeled with pin 1 and pin 24. But some of them have the metal lands on the top side of the FPC cable and some of them have the metal on the bottom side of the cable. The matching connector on the PCB is also labeled for pin 1 and pin 24.
So when I plug these cables into the PCB connector, does that FPC connector make contact with metal lands on either side, or just one side? I can't get these camera to show up on I2C and I am wondering if the connector is simply not making contact when the lands are on the wrong side. There is no simple way to put a scope on it since the flex cable has a coating on it. -- Jon Smirl [email protected] -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
