A23/A33 have separate reset lines for each PHY, like on sun6i, but only 2 PHYs instead of 3. Add a new compatible for this.
There is also an HSIC PHY, but no hardware that uses it exists. Signed-off-by: Chen-Yu Tsai <[email protected]> --- Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt | 2 ++ drivers/phy/phy-sun4i-usb.c | 7 +++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 16528b9eb561..9148f0535b29 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -7,6 +7,7 @@ Required properties: * allwinner,sun5i-a13-usb-phy * allwinner,sun6i-a31-usb-phy * allwinner,sun7i-a20-usb-phy + * allwinner,sun8i-a23-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" @@ -17,6 +18,7 @@ Required properties: - clock-names : * "usb_phy" for sun4i, sun5i or sun7i * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i + * "usb0_phy", "usb1_phy" for sun8i-a23 - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index a2b08f3ccb03..a60c45c075e7 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -239,7 +239,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) mutex_init(&data->mutex); - if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy")) + if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy") || + of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy")) data->num_phys = 2; else data->num_phys = 3; @@ -250,7 +251,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) else data->disc_thresh = 2; - if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy") || + of_device_is_compatible(np, "allwinner,sun8i-a23-usb-phy")) dedicated_clocks = true; else dedicated_clocks = false; @@ -320,6 +322,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { { .compatible = "allwinner,sun5i-a13-usb-phy" }, { .compatible = "allwinner,sun6i-a31-usb-phy" }, { .compatible = "allwinner,sun7i-a20-usb-phy" }, + { .compatible = "allwinner,sun8i-a23-usb-phy" }, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
