Like on most non devel-boards it is still possible to get an uart on the Utoo P66 tablet by soldering some wires to the right pads on the PCB, add support for this to the dts, like we do with all sunxi boards.
Signed-off-by: Hans de Goede <[email protected]> --- arch/arm/boot/dts/sun5i-a13-utoo-p66.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 00bdf28..bb8d61a 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -57,6 +57,14 @@ model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + i2c_lcd: i2c@0 { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; @@ -238,6 +246,12 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + &usb_otg { dr_mode = "otg"; status = "okay"; -- 2.3.5 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
