From: Han Pengfei <[email protected]> The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi, 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external USB2SATA connector, sd card plug, 3x60 external fpic expansion connector, NXP JN5168 zigbee gw, remote support.
Also see http://focalcrest.com/en/pc.html#pro02 Signed-off-by: Han Pengfei <[email protected]> --- board/sunxi/MAINTAINERS | 5 +++++ configs/mixtile_loftq_defconfig | 16 ++++++++++++++++ 2 files changed, 21 insertions(+) create mode 100644 configs/mixtile_loftq_defconfig diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ef3c937..90a634e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -143,3 +143,8 @@ WEXLER-TAB7200 BOARD M: Aleksei Mamlin <[email protected]> S: Maintained F: configs/Wexler_TAB7200_defconfig + +MIXTILE-LOFTQ BOARD +M: Phil Han <[email protected]> +S: Maintained +F: configs/mixtile_loftq_defconfig diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig new file mode 100644 index 0000000..94ebdc8 --- /dev/null +++ b/configs/mixtile_loftq_defconfig @@ -0,0 +1,16 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN6I=y ++S:CONFIG_TARGET_MIXTILE_LOFTQ=y ++S:CONFIG_DRAM_CLK=312 ++S:CONFIG_DRAM_ZQ=251 ++S:CONFIG_MMC_SUNXI_SLOT=0 ++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# Wifi power ++S:CONFIG_AXP221_ALDO1_VOLT=3300 +# Vbus gpio for usb1 ++S:CONFIG_USB1_VBUS_PIN="PH24" +# No Vbus gpio for usb2 ++S:CONFIG_USB2_VBUS_PIN="" -- 1.9.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
