Enable the UART0 muxing, as set up by the bootloader.
Signed-off-by: Maxime Ripard <[email protected]>
---
arch/arm/boot/dts/sun9i-a80-optimus.dts | 2 ++
arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++
2 files changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts
b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index f83abab108b9..9ed60f3927a3 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -60,6 +60,8 @@
soc {
uart0: serial@07000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index db8713bad2bc..27db26de70b8 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -351,6 +351,13 @@
#interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PH12", "PH13";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
uart0: serial@07000000 {
--
2.1.1
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
