Maybe you should take a little more time to read the guides. /////////////////////////////////////// LCD interface define what type of interface to use for LCD. For LVDS the right value is 3:
; lcd interface lcd_if = 3 Check whether 24 or 18 bit color is used, and set lcd_lvds_bitwidth = 1 (if 18bit (RGB666) is used) RX0+ = LCD0-D0 RX0- = LCD0-D1 RX1+ = LCD0-D3 RX1- = LCD0-D4 RX2+ = LCD0-D5 RX2- = LCD0-D6 RXC+ = LCD0-D7 RXC- = LCD0-D8 You could ignore EDID pins： 4 V EEDID DDC 3.3V power 5 NC Reserved for supplier test point 6 Clk EEDID DDC Clock 7 DATA EEDID DDC Data 2014-10-10 15:07 GMT+08:00 đeli hađiselimović <[email protected]>: > Hi! > > I found out the LCD_CON on OLinuxino-micro A20 could output LVDS instead of > TTL which is default if I get it right. > > Now I checked the FEX guide > > http://linux-sunxi.org/Fex_Guide#lcd.5B0.2F1.5D_configuration > > and this example > > http://linux-sunxi.org/Cubieboard/LVDS > > > I dont see from here how to activate ports on A20 (for example PD00 - PD18) > to represent the 19 pins required to drive the TFT-LCD. > > My panel is QD15TL0206 and its pinout: > > Interface Cable Pin Assignments > PIN NO . SYMBOL FUNCTION > > 1 VSS Ground > 2 VDD Power Supply, 3.3 V (typical) > 3 VDD Power Supply, 3.3 V (typical) > 4 V EEDID DDC 3.3V power > 5 NC Reserved for supplier test point > 6 Clk EEDID DDC Clock > 7 DATA EEDID DDC Data > 8 Rin0- - LVDS differential data input (R0-R5, G0) (odd pixels) > 9 Rin0+ + LVDS differential data input (R0-R5, G0) (odd pixels) > 10 VSS Ground > 11 Rin1- - LVDS differential data input (G1-G5, B0-B1) (odd > pixels) > 12 Rin1+ + LVDS differential data input (G1-G5, B0-B1) (odd > pixels) > 13 VSS Ground > 14 Rin2- - LVDS differential data input (B2-B5, HS, VS, DE) (odd > pixels) > 15 Rin2+ + LVDS differential data input (B2-B5, HS, VS, DE) (odd > pixels) > 16 VSS Ground > 17 ClkIN- - LVDS differential clock input (odd pixels) > 18 ClkIN+ + LVDS differential clock input (odd pixels) > 19 VSS Ground > > Cheers, > > Miha > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
