This patch will add a basic board support DT for the LinkSprite pcDuino V3, which is based on A20.
Signed-off-by: Zoltan HERPAI <[email protected]> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 70 ++++++++++++++++++++++++++++++ 2 files changed, 72 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1cd137d..821fa99 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -354,7 +354,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun6i-a31-m9.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ - sun7i-a20-olinuxino-micro.dtb + sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-pcduino3.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts new file mode 100644 index 0000000..bf9d527 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -0,0 +1,70 @@ +/* + * Copyright 2014 Zoltan HERPAI + * Zoltan HERPAI <[email protected]> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "LinkSprite pcDuino V3"; + compatible = "linksprite,a20-pcduino3", "allwinner,sun7i-a20"; + + soc@01c00000 { + pinctrl@01c20800 { + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3>; + + green { + label = "a20-pcduino3:green:usr"; + gpios = <&pio 7 2 0>; + default-state = "on"; + }; + }; + +}; -- 1.7.10.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
