On 02/21/14 22:05, Almo Nito wrote:
Can Someone please help converting the following code into sunxi code:#define GTP_RST_PORT S5PV210_GPJ3(6) #define GTP_INT_PORT S5PV210_GPH1(3) #define GTP_INT_IRQ gpio_to_irq(GTP_INT_PORT) #define GTP_INT_CFG S3C_GPIO_SFN(0xF) #define GTP_GPIO_AS_INPUT(pin) do{\ gpio_direction_input(pin);\ s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);\ }while(0) #define GTP_GPIO_AS_INT(pin) do{\ GTP_GPIO_AS_INPUT(pin);\ s3c_gpio_cfgpin(pin, GTP_INT_CFG);\ }while(0) #define GTP_GPIO_GET_VALUE(pin) gpio_get_value(pin) #define GTP_GPIO_OUTPUT(pin,level) gpio_direction_output(pin,level) #define GTP_GPIO_REQUEST(pin, label) gpio_request(pin, label) #define GTP_GPIO_FREE(pin) gpio_free(pin) #define GTP_IRQ_TAB {IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH} This would be very very helpful for me
https://github.com/oliv3r/u-boot-sunxi/blob/8dde68488f9c9b62f41a9cb1a6403660c80a3f60/arch/arm/include/asm/arch-sunxi/gpio.h this is how it's handled in u-boot. not quite sure what youa re after though ... oliver
Thank you very much
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
