On Wed, Feb 19, 2014 at 6:01 AM, Hans de Goede <[email protected]> wrote:
> Hi all, > > Here is v6 of my patchset for adding ahci-sunxi support. This has been > tested with Allwinner A10, Allwinner A20 and Freeware imx6x SoCs, including > suspend / resume. Note that since my last revision the ahci_imx driver has > also grown imx53 sata support, it would be good if some-one could test that > with this series. > basic file system tests on an imx53-qsb look fine with sata changes.. Using v3.14-rc3 + 20140219 (next) + shawn.guo's imx for-next branch which wasn't in today next tree.. debian@arm:~$ dmesg | grep ata [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Memory: 1010076K/1048576K available (7008K kernel code, 527K rwdata, 2280K rodata, 416K init, 373K bss, 38500K reserved, 524288K highmem) [ 0.000000] .data : 0xc0984000 - 0xc0a07d60 ( 528 kB) [ 1.796587] libata version 3.00 loaded. [ 2.777037] ahci-imx 10000000.sata: unable to find phy [ 2.784385] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 2.791495] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.800394] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 2.814178] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 3.400107] ata1: softreset failed (device not ready) [ 3.405174] ata1: applying PMP SRST workaround and retrying [ 3.610105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.663654] ata1.00: ATA-8: ST9120315AS, 0001SDM1, max UDMA/133 [ 3.669583] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.678553] ata1.00: configured for UDMA/133 [ 5.680633] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
