HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.
Also adding name of PHY placed on HSDK board.
Signed-off-by: Evgeniy Didin <evgeniy.di...@synopsys.com>
Cc: Eugeniy Paltsev <eugeniy.palt...@synopsys.com>
Cc: Alexey Brodkin <abrod...@synopsys.com>
---
arch/arc/boot/dts/hsdk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 9acbeba832c0..d6427d47e5a1 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -208,7 +208,7 @@
reg = <0x8000 0x2000>;
interrupts = <10>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
snps,pbl = <32>;
snps,multicast-filter-bins = <256>;
clocks = <&gmacclk>;
@@ -226,7 +226,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
reg = <0>;
};
};
--
2.16.2
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
