Signed-off-by: Vineet Gupta <vgu...@synopsys.com>
---
arch/arc/Kconfig | 15 +++++----------
arch/arc/include/asm/arcregs.h | 2 ++
arch/arc/include/asm/fpu.h | 28 +++++++++++++++++++++++++++-
arch/arc/kernel/Makefile | 2 ++
arch/arc/kernel/fpu.c | 27 +++++++++++++++++++++++++++
arch/arc/kernel/process.c | 6 +++++-
6 files changed, 68 insertions(+), 12 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 3b074c4d31fb..2e56cd5277b7 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -352,9 +352,8 @@ config NODES_SHIFT
Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
zones.
-if ISA_ARCOMPACT
-
config ARC_COMPACT_IRQ_LEVELS
+ depends on ISA_ARCOMPACT
bool "Setup Timer IRQ as high Priority"
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
depends on !SMP
@@ -362,14 +361,10 @@ config ARC_COMPACT_IRQ_LEVELS
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
help
- Double Precision Floating Point unit had dedicated regs which
- need to be saved/restored across context-switch.
- Note that ARC FPU is overly simplistic, unlike say x86, which has
- hardware pieces to allow software to conditionally save/restore,
- based on actual usage of FPU by a task. Thus our implemn does
- this for all tasks in system.
-
-endif #ISA_ARCOMPACT
+ ARCompact FPU has internal registers to assist with Double precision
+ Floating Point operations. There are control and stauts registers
+ for floating point exceptions and rounding modes. These are
+ preserved across task context switch when enabled.
config ARC_CANT_LLSC
def_bool n
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 5134f0baf33c..f7e432448e4b 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -39,6 +39,8 @@
#define ARC_REG_CLUSTER_BCR 0xcf
#define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */
#define ARC_REG_LPB_CTRL 0x488 /* ARCv2 Loop Buffer control */
+#define ARC_REG_FPU_CTRL 0x300
+#define ARC_REG_FPU_STATUS 0x301
/* Common for ARCompact and ARCv2 status register */
#define ARC_REG_STATUS32 0x0A
diff --git a/arch/arc/include/asm/fpu.h b/arch/arc/include/asm/fpu.h
index de467423d99b..64347250fdf5 100644
--- a/arch/arc/include/asm/fpu.h
+++ b/arch/arc/include/asm/fpu.h
@@ -11,6 +11,8 @@
#include <asm/ptrace.h>
+#ifdef CONFIG_ISA_ARCOMPACT
+
/* These DPFP regs need to be saved/restored across ctx-sw */
struct arc_fpu {
struct {
@@ -18,11 +20,35 @@ struct arc_fpu {
} aux_dpfp[2];
};
-extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+#define fpu_init_task(regs)
#else
+/*
+ * ARCv2 FPU Control aux register
+ * - bits to enable Traps on Exceptions
+ * - Rounding mode
+ *
+ * ARCv2 FPU Status aux register
+ * - FPU exceptions flags (Inv, Div-by-Zero, overflow, underflow, inexact)
+ * - Flag Write Enable to clear flags explicitly (vs. by fpu instructions
+ * only
+ */
+
+struct arc_fpu {
+ unsigned int ctrl, status;
+};
+
+extern void fpu_init_task(struct pt_regs *regs);
+
+#endif /* !CONFIG_ISA_ARCOMPACT */
+
+extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+
+#else /* !CONFIG_ARC_FPU_SAVE_RESTORE */
+
#define fpu_save_restore(p, n)
+#define fpu_init_task(regs)
#endif /* CONFIG_ARC_FPU_SAVE_RESTORE */
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e784f5396dda..75539670431a 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -23,7 +23,9 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o
+ifdef CONFIG_ISA_ARCOMPACT
CFLAGS_fpu.o += -mdpfp
+endif
ifdef CONFIG_ARC_DW2_UNWIND
CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
index 7a3b56ce56bb..c67c0f0f5f77 100644
--- a/arch/arc/kernel/fpu.c
+++ b/arch/arc/kernel/fpu.c
@@ -8,6 +8,8 @@
#include <linux/sched.h>
#include <asm/fpu.h>
+#ifdef CONFIG_ISA_ARCOMPACT
+
/*
* To save/restore FPU regs, simplest scheme would use LR/SR insns.
* However since SR serializes the pipeline, an alternate "hack" can be used
@@ -50,3 +52,28 @@ void fpu_save_restore(struct task_struct *prev, struct
task_struct *next)
: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2))
);
}
+
+#else
+
+void fpu_init_task(struct pt_regs *regs)
+{
+ /* default rounding mode */
+ write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
+
+ /* set "Write enable" to allow explicit write to exception flags */
+ write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+}
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+ struct arc_fpu *save = &prev->thread.fpu;
+ struct arc_fpu *restore = &next->thread.fpu;
+
+ save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
+ save->status = read_aux_reg(ARC_REG_FPU_STATUS);
+
+ write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
+ write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+}
+
+#endif
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index e1889ce3faf9..804065b887e4 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -20,6 +20,8 @@
#include <linux/elf.h>
#include <linux/tick.h>
+#include <asm/fpu.h>
+
SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
{
task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
@@ -264,7 +266,7 @@ int copy_thread(unsigned long clone_flags,
/*
* Do necessary setup to start up a new user task
*/
-void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
{
regs->sp = usp;
regs->ret = pc;
@@ -280,6 +282,8 @@ void start_thread(struct pt_regs * regs, unsigned long pc,
unsigned long usp)
regs->eflags = 0;
#endif
+ fpu_init_task(regs);
+
/* bogus seed values for debugging */
regs->lp_start = 0x10;
regs->lp_end = 0x80;
--
2.20.1
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
