The most recent release of AXS103 [v1.1] is proven to work
at 100 MHz in dual-core mode so this change uses mentioned feature.
For that we:
 * Update axc003_idu.dtsi with mention of really-used CPU clock freq
 * Remove clock override in AXS platform code for dual-core HW
Note we're still leaving a hack for clock "downgrade" on early boot
for quad-core hardware.

Also note this change will break functionality of AXS103 v1.0 hardware.
That means all users of AXS103 __must__ upgrade their boards with the
most recent firmware.

Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
---
 arch/arc/boot/dts/axc003_idu.dtsi | 2 +-
 arch/arc/plat-axs10x/axs10x.c     | 2 --
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arc/boot/dts/axc003_idu.dtsi 
b/arch/arc/boot/dts/axc003_idu.dtsi
index 8955881d..ed1674b 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -28,7 +28,7 @@
                core_clk: core_clk {
                        #clock-cells = <0>;
                        compatible = "fixed-clock";
-                       clock-frequency = <90000000>;
+                       clock-frequency = <100000000>;
                };
 
                core_intc: archs-intc@cpu {
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 9701c93..8654870 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -410,8 +410,6 @@ static void __init axs103_early_init(void)
        unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
        if (num_cores > 2)
                freq = 50;
-       else if (num_cores == 2)
-               freq = 75;
 #endif
 
        switch (freq) {
-- 
2.5.5


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

Reply via email to