Diego Liziero wrote:
>
> I've tried to use lilo-21.5 in a root raid1 partition with a 2.2.16
> kernel with the latest raid patch (A0).
>
> I've installed lilo with the lilo.conf suggested by the linux-raid docs:
>
> boot = /dev/md0 # my root raid1 partition composed by /dev/hda1 & /dev/hdc1
> linear # tested also without it and also tested with lba32
> image = /vmlinuz-2.2.16-RAID
> root = /dev/md0
> label = linux-raid
> read-only
>
> After the reboot lilo keep on printing an error followed by a 0x80 and by
> a floppy seek. (Why does it seek the floppy?)
I had the same problem. The solution is to put a default= statement into
your lilo.conf, eg. default="linux-raid".
juri
--
[EMAIL PROTECTED]
system engineer innominate AG
clustering & security networking people
phone: +49-30-308806-45 fax: -77 web: http://innominate.de
