On Wednesday July 4, [EMAIL PROTECTED] wrote:
>
> Thanks for everyone's feedback. I made some progress by changing to
> a single lilo.conf file and changing boot to /dev/md0, but I still
> can't get my system to boot when sdb is offline.
>
> When I ran lilo, it only mentioned writing to /dev/sdb in the output.
> This leads me to believe that boot=/dev/md0 isn't writing the MBR to
> /dev/sda, and is further suggested by the fact that the system won't
> boot when /dev/sdb is offline. Is there something else I can do to
> force lilo to write the MDB on BOTH disks?
Is your RAID1 full functional off both drives when you run lilo, or is
it in degraded mode (only one drive active, the other possibly
rebuilding?).
lilo will only write boot information on drives that are fully
functional parts of the array.
NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
