[EXTERNAL EMAIL]
Hi,
I'm updating multiple servers via ansible and I've run into the same issue
on the first two test servers. After the successful dsu run the server
halts during reboot with the message "UEFI0306: Unable to update BIOS
firmware because the new BIOS image file used is currupted." After reboot I
rerun dsu, it uses the same rpm to update BIOS again an it works after the
reboot.
Has anyone had similar issues? Or a recommendation on how to fix it so it
works the first time?
Attaching the dsu cli outputs.
Greetings
Klaas
ok: [server.domain.tld] => {
"command_result": {
"changed": true,
"cmd": [
"dsu",
"--non-interactive",
"--apply-upgrades"
],
"delta": "0:05:17.876161",
"end": "2019-10-08 15:31:32.841917",
"failed": false,
"failed_when_result": false,
"msg": "non-zero return code",
"rc": 8,
"start": "2019-10-08 15:26:14.965756",
"stderr":
"\n............................................................",
"stderr_lines": [
"",
"............................................................"
],
"stdout": "DELL EMC System Update 1.7.0\nCopyright (C) 2014 DELL EMC
Proprietary.\nVerifying catalog installation ...\nInstalling catalog from
repository ...\nFetching dsucatalog ...\nReading the catalog ...\nVerifying
inventory collector installation ...\nGetting System Inventory ...\nDetermining
Applicable Updates ...\nFetching BIOS_NM8WY_LN_2.2.11 ...\nInstalling
BIOS_NM8WY_LN_2.2.11\nCollecting inventory...\nRunning
validation...\n\nPowerEdge BIOS\n\nThe version of this Update Package is newer
than the currently installed version.\nSoftware application name: BIOS\nPackage
version: 2.2.11\nInstalled version: 2.1.6\n\n\nExecuting update...\nWARNING: DO
NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE UPDATE IS IN
PROGRESS.\nTHESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!\nThe system
should be restarted for the update to take effect.\nPlease restart the system
for successful update(s) to take effect\nExiting DSU!",
"stdout_lines": [
"DELL EMC System Update 1.7.0",
"Copyright (C) 2014 DELL EMC Proprietary.",
"Verifying catalog installation ...",
"Installing catalog from repository ...",
"Fetching dsucatalog ...",
"Reading the catalog ...",
"Verifying inventory collector installation ...",
"Getting System Inventory ...",
"Determining Applicable Updates ...",
"Fetching BIOS_NM8WY_LN_2.2.11 ...",
"Installing BIOS_NM8WY_LN_2.2.11",
"Collecting inventory...",
"Running validation...",
"",
"PowerEdge BIOS",
"",
"The version of this Update Package is newer than the currently
installed version.",
"Software application name: BIOS",
"Package version: 2.2.11",
"Installed version: 2.1.6",
"",
"",
"Executing update...",
"WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE
UPDATE IS IN PROGRESS.",
"THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!",
"The system should be restarted for the update to take effect.",
"Please restart the system for successful update(s) to take effect",
"Exiting DSU!"
]
}
}
ok: [server.domain.tld] => {
"command_result": {
"changed": true,
"cmd": [
"dsu",
"--non-interactive",
"--apply-upgrades"
],
"delta": "0:11:14.711975",
"end": "2019-10-08 14:34:09.006343",
"failed": false,
"failed_when_result": false,
"msg": "non-zero return code",
"rc": 8,
"start": "2019-10-08 14:22:54.294368",
"stderr":
"..................................................\n...............................................................................................................................\n....\n................................................................\n\n.......................................................",
"stderr_lines": [
"..................................................",
"...............................................................................................................................",
"....",
"................................................................",
"",
"......................................................."
],
"stdout": "DELL EMC System Update 1.7.0\nCopyright (C) 2014 DELL EMC
Proprietary.\nVerifying catalog installation ...\nInstalling catalog from
repository ...\nFetching dsucatalog ...\nReading the catalog ...\nVerifying
inventory collector installation ...\nGetting System Inventory ...\nDetermining
Applicable Updates ...\nFetching
Diagnostics_Application_2WKJV_LN_4301A29_4301.30 ...\nInstalling
Diagnostics_Application_2WKJV_LN_4301A29_4301.30\nCollecting
inventory...\nRunning validation...\n\nDell 64 Bit uEFI Diagnostics, version
4301, 4301A25, 4301.26\n\nThe version of this Update Package is newer than the
currently installed version.\nSoftware application name: Dell 64 Bit uEFI
Diagnostics, version 4301, 4301A25, 4301.26\nPackage version:
4301A29\nInstalled version: 4301A25\n\n\nExecuting update...\nWARNING: DO NOT
STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE UPDATE IS IN PROGRESS.\nTHESE
ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!\nThe update completed
successfully.\nFetching SAS-RAID_Firmware_FJHK3_LN_50.5.1-2633_A07
...\nInstalling SAS-RAID_Firmware_FJHK3_LN_50.5.1-2633_A07\nCollecting
inventory...\nRunning validation...\n\nPERC H740P Adapter Controller 0\n\nThe
version of this Update Package is newer than the currently installed
version.\nSoftware application name: PERC H740P Adapter Controller 0
Firmware\nPackage version: 50.5.1-2633\nInstalled version:
50.5.0-1750\n\n\nExecuting update...\nWARNING: DO NOT STOP THIS PROCESS OR
INSTALL OTHER PRODUCTS WHILE UPDATE IS IN PROGRESS.\nTHESE ACTIONS MAY CAUSE
YOUR SYSTEM TO BECOME UNSTABLE!\nThe system should be restarted for the update
to take effect.\nFetching BIOS_NM8WY_LN_2.2.11 ...\nInstalling
BIOS_NM8WY_LN_2.2.11\nCollecting inventory...\nRunning
validation...\n\nPowerEdge BIOS\n\nThe version of this Update Package is newer
than the currently installed version.\nSoftware application name: BIOS\nPackage
version: 2.2.11\nInstalled version: 2.1.6\n\n\nExecuting update...\nWARNING: DO
NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE UPDATE IS IN
PROGRESS.\nTHESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!\nThe system
should be restarted for the update to take effect.\nPlease restart the system
for successful update(s) to take effect\nExiting DSU!",
"stdout_lines": [
"DELL EMC System Update 1.7.0",
"Copyright (C) 2014 DELL EMC Proprietary.",
"Verifying catalog installation ...",
"Installing catalog from repository ...",
"Fetching dsucatalog ...",
"Reading the catalog ...",
"Verifying inventory collector installation ...",
"Getting System Inventory ...",
"Determining Applicable Updates ...",
"Fetching Diagnostics_Application_2WKJV_LN_4301A29_4301.30 ...",
"Installing Diagnostics_Application_2WKJV_LN_4301A29_4301.30",
"Collecting inventory...",
"Running validation...",
"",
"Dell 64 Bit uEFI Diagnostics, version 4301, 4301A25, 4301.26",
"",
"The version of this Update Package is newer than the currently
installed version.",
"Software application name: Dell 64 Bit uEFI Diagnostics, version
4301, 4301A25, 4301.26",
"Package version: 4301A29",
"Installed version: 4301A25",
"",
"",
"Executing update...",
"WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE
UPDATE IS IN PROGRESS.",
"THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!",
"The update completed successfully.",
"Fetching SAS-RAID_Firmware_FJHK3_LN_50.5.1-2633_A07 ...",
"Installing SAS-RAID_Firmware_FJHK3_LN_50.5.1-2633_A07",
"Collecting inventory...",
"Running validation...",
"",
"PERC H740P Adapter Controller 0",
"",
"The version of this Update Package is newer than the currently
installed version.",
"Software application name: PERC H740P Adapter Controller 0
Firmware",
"Package version: 50.5.1-2633",
"Installed version: 50.5.0-1750",
"",
"",
"Executing update...",
"WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE
UPDATE IS IN PROGRESS.",
"THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!",
"The system should be restarted for the update to take effect.",
"Fetching BIOS_NM8WY_LN_2.2.11 ...",
"Installing BIOS_NM8WY_LN_2.2.11",
"Collecting inventory...",
"Running validation...",
"",
"PowerEdge BIOS",
"",
"The version of this Update Package is newer than the currently
installed version.",
"Software application name: BIOS",
"Package version: 2.2.11",
"Installed version: 2.1.6",
"",
"",
"Executing update...",
"WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE
UPDATE IS IN PROGRESS.",
"THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!",
"The system should be restarted for the update to take effect.",
"Please restart the system for successful update(s) to take effect",
"Exiting DSU!"
]
}
}
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
