Hi all,
Yesterday we rebooted a T320 node and it got hung on boot (it is in a
remote location so don't know what was on screen).
A power cycle made the server boot, and it is working well now, but
we're getting "Unknown" readings for the following voltage sensors:
Voltage sensor 0 [CPU1 MEM VTT PG] is Unknown reading
Voltage sensor 3 [CPU1 MEM VDDQ PG] is Unknown reading
Voltage sensor 4 [CPU1 VTT PG] is Unknown reading
Voltage sensor 5 [CPU1 VCORE PG] is Unknown reading
Voltage sensor 6 [CPU1 PLL PG] is Unknown reading
Voltage sensor 11 [CPU1 VSA PG] is Unknown reading
Voltage sensor 14 [System Board BP1 5V PG] is Unknown reading
We get this info with check_openmanage as well as with OMSA 7.4 Web GUI.
Operating system is Proxmox VE (Debian-based) 3.4 with kernel 2.6.32-48
(this is a RHEL kernel repackaged by Proxmox distribution).
I'm unsure about the source of the problem, could it be hardware-related
(as it was hung in the reboot?) or maybe software-related (kernel was
updated, that was the reason for the reboot)? Anyone has seen something
like this?
Thanks a lot
Eneko
--
Zuzendari Teknikoa / Director Técnico
Binovo IT Human Project, S.L.
Telf. 943493611
943324914
Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa)
www.binovo.es
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
