Ole Martin Handeland wrote:
Hi,
When i just inserted this second network card my redhat network config shows this:
Desc. Type Device Status RTL-8139/8139C/8139C+ Ethernet eth0 ok RTL-8139/8139C/8139C+ Unknown dev22193 ok
Yes, i have two pci slots with two identical cards in. ifconfig shows this:
dev22193 Link encap:Ethernet HWaddr 00:E0:4C:39:32:3F inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:4cff:fe39:323f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:55 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:7474 (7.2 Kb) Interrupt:10 Base address:0xc000
eth0 Link encap:Ethernet HWaddr 00:10:A7:13:CB:0D inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::210:a7ff:fe13:cb0d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108 errors:0 dropped:0 overruns:0 frame:0 TX packets:37 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16616 (16.2 Kb) TX bytes:4623 (4.5 Kb) Interrupt:11 Base address:0xc400
So, my question is: why is this network card just partially found? my kudzu found it, i configured it, and it dont work...?
System: 700mhz celeron, 256mb ram, fedora core 2, and, as you see, one and a half network cards...
They may not be identical. What does 'cat /proc/pci' show, relative to the two cards? What is shown when the system is booted with one card at a time? HTH, Chuck
- To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
