Hi Jaehoon, On 10/21/2015 04:19 PM, Jaehoon Chung wrote: > When card is running with DDR mode, dwmmc needs to set DDR_REG bit at > UHS_REG register. > Before this patch, dwmmc controller doesn't consider this. > If this patch is not applied, CRC or other error shoulds be occurred. > > Signed-off-by: Jaehoon Chung <[email protected]> > Looks good to me, Reviewed-by: Alim Akhtar <[email protected]> Tested on peach board with some additional dt changes, works well. so, Tested-by: Alim Akhtar <[email protected]>
> --- > drivers/mmc/host/dw_mmc.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 6e600e8..cb31e8e 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -1295,6 +1295,7 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct > mmc_ios *ios) > > /* DDR mode set */ > if (ios->timing == MMC_TIMING_MMC_DDR52 || > + ios->timing == MMC_TIMING_UHS_DDR50 || > ios->timing == MMC_TIMING_MMC_HS400) > regs |= ((0x1 << slot->id) << 16); > else > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
