From: Fabio Estevam <[email protected]>
Since commit e2997c944dbdff3f ("mmc: sdhci-esdhc-imx: add MMC_CAP_1_8V_DDR
for mx6") the driver sets the MMC_CAP_1_8V_DDR flag unconditionally on
mx6, but we should not do this when the 'no-1-8-v' property is passed via
device tree.
This causes the following errors when accessing eMMC on a mx6sl board:
mmc0: MAN_BKOPS_EN bit is not set
mmc0: power class selection to bus width 8 ddr 4 failed
mmc0: error -110 whilst initialising MMC card
So only set the MMC_CAP_1_8V_DDR flag when the 'no-1-8-v' property is
absent.
With this fix in place it is possible to successfully mount the rootfs
from the emmc on a mx6sl board which has 'no-1-8-v' property passed in the
device tree.
Fixes: e2997c944dbdff3f ("mmc: sdhci-esdhc-imx: add MMC_CAP_1_8V_DDR for mx6")
Cc: [email protected]
Reported-by: Kevin Lemoi <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
b/drivers/mmc/host/sdhci-esdhc-imx.c
index faf0cb9..b562faf 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1005,7 +1005,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device
*pdev)
if (esdhc_is_usdhc(imx_data)) {
writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
- host->mmc->caps |= MMC_CAP_1_8V_DDR;
if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
@@ -1094,6 +1093,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device
*pdev)
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
!IS_ERR(imx_data->pins_default)) {
+ host->mmc->caps |= MMC_CAP_1_8V_DDR;
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
