Changes include indenting and spacing.

Also replaced a few asm/ includes with linux/. Sometimes the
new include has already been included so just removed the /asm.

Signed-off-by: Daniel Lockyer <[email protected]>
---
 drivers/mmc/host/android-goldfish.c | 14 ++++++--------
 drivers/mmc/host/atmel-mci.c        | 14 +++++---------
 drivers/mmc/host/au1xmmc.c          | 16 +++++++---------
 drivers/mmc/host/mmci.c             |  6 ++----
 4 files changed, 20 insertions(+), 30 deletions(-)

diff --git a/drivers/mmc/host/android-goldfish.c 
b/drivers/mmc/host/android-goldfish.c
index 8b4e20a..afea796 100644
--- a/drivers/mmc/host/android-goldfish.c
+++ b/drivers/mmc/host/android-goldfish.c
@@ -43,13 +43,11 @@
 #include <linux/timer.h>
 #include <linux/clk.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
-#include <asm/scatterlist.h>
-
+#include <linux/scatterlist.h>
 #include <asm/types.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define DRIVER_NAME "goldfish_mmc"
 
@@ -309,10 +307,10 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
                if (status & MMC_STAT_STATE_CHANGE)
                        state_changed = 1;
 
-                if (status & MMC_STAT_CMD_TIMEOUT) {
+               if (status & MMC_STAT_CMD_TIMEOUT) {
                        end_command = 0;
                        cmd_timeout = 1;
-                }
+               }
        }
 
        if (cmd_timeout) {
@@ -353,7 +351,7 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id)
        if (!end_command && !end_transfer &&
            !transfer_error && !state_changed && !cmd_timeout) {
                status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS);
-               dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+               dev_info(mmc_dev(host->mmc), "spurious irq 0x%04x\n", status);
                if (status != 0) {
                        GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status);
                        GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0);
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 9a39e0b..e5d2216 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -42,7 +42,6 @@
 #include <linux/pinctrl/consumer.h>
 
 #include <asm/cacheflush.h>
-#include <asm/io.h>
 #include <asm/unaligned.h>
 
 #include "atmel-mci-regs.h"
@@ -1390,9 +1389,8 @@ static void atmci_set_ios(struct mmc_host *mmc, struct 
mmc_ios *ios)
                }
                if (!any_slot_active) {
                        atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
-                       if (host->mode_reg) {
+                       if (host->mode_reg)
                                atmci_readl(host, ATMCI_MR);
-                       }
                        host->mode_reg = 0;
                }
                spin_unlock_bh(&host->lock);
@@ -1830,13 +1828,12 @@ static void atmci_tasklet_func(unsigned long priv)
                                host->stop_transfer(host);
                                host->data = NULL;
                                if (data) {
-                                       if (status & ATMCI_DTOE) {
+                                       if (status & ATMCI_DTOE)
                                                data->error = -ETIMEDOUT;
-                                       } else if (status & ATMCI_DCRCE) {
+                                       else if (status & ATMCI_DCRCE)
                                                data->error = -EILSEQ;
-                                       } else {
+                                       else
                                                data->error = -EIO;
-                                       }
                                }
                        }
 
@@ -1995,9 +1992,8 @@ static void atmci_sdio_interrupt(struct atmel_mci *host, 
u32 status)
 
        for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
                struct atmel_mci_slot *slot = host->slot[i];
-               if (slot && (status & slot->sdio_irq)) {
+               if (slot && (status & slot->sdio_irq))
                        mmc_signal_sdio_irq(slot->mmc);
-               }
        }
 }
 
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index ed77fbf..044206d 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -43,8 +43,8 @@
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
@@ -352,7 +352,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host 
*host, u32 status)
        data->error = 0;
        dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
 
-        /* Process any errors */
+       /* Process any errors */
        crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
        if (host->flags & HOST_F_XMIT)
                crc |= ((status & 0x07) == 0x02) ? 0 : 1;
@@ -491,8 +491,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
                        DBG("RX Overrun [%d + %d]\n", host->pdev->id,
                                        host->pio.len, count);
                        break;
-               }
-               else if (status & SD_STATUS_RU) {
+               } else if (status & SD_STATUS_RU) {
                        DBG("RX Underrun [%d + %d]\n", host->pdev->id,
                                        host->pio.len,  count);
                        break;
@@ -567,7 +566,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, 
u32 status)
                }
        }
 
-        /* Figure out errors */
+       /* Figure out errors */
        if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
                cmd->error = -EILSEQ;
 
@@ -589,7 +588,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, 
u32 status)
                if (host->flags & HOST_F_RECV) {
                        u32 mask = SD_STATUS_DB | SD_STATUS_NE;
 
-                       while((status & mask) != mask)
+                       while ((status & mask) != mask)
                                status = __raw_readl(HOST_STATUS(host));
                }
 
@@ -685,7 +684,7 @@ dataerr:
 }
 
 /* This actually starts a command or data transaction */
-static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
+static void au1xmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
        struct au1xmmc_host *host = mmc_priv(mmc);
        int ret = 0;
@@ -758,9 +757,8 @@ static void au1xmmc_set_ios(struct mmc_host *mmc, struct 
mmc_ios *ios)
 
        if (ios->power_mode == MMC_POWER_OFF)
                au1xmmc_set_power(host, 0);
-       else if (ios->power_mode == MMC_POWER_ON) {
+       else if (ios->power_mode == MMC_POWER_ON)
                au1xmmc_set_power(host, 1);
-       }
 
        if (ios->clock && ios->clock != host->clock) {
                au1xmmc_set_clock(host, ios->clock);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index fb26674..653d7bea 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -39,7 +39,6 @@
 #include <linux/pinctrl/consumer.h>
 
 #include <asm/div64.h>
-#include <asm/io.h>
 #include <asm/sizes.h>
 
 #include "mmci.h"
@@ -968,11 +967,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data 
*data,
                        /* The error clause is handled above, success! */
                        data->bytes_xfered = data->blksz * data->blocks;
 
-               if (!data->stop || host->mrq->sbc) {
+               if (!data->stop || host->mrq->sbc)
                        mmci_request_end(host, data->mrq);
-               } else {
+               else
                        mmci_start_command(host, data->stop, 0);
-               }
        }
 }
 
-- 
2.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to