From: Arnd Bergmann <[email protected]>

Jonas Jensen wanted to submit a patch for these, but apparently
forgot about it. I stumbled over this symptom first:

drivers/built-in.o: In function `moxart_probe':
:(.text+0x2af128): undefined reference to `of_dma_request_slave_channel'

This is because of_dma_request_slave_channel is an internal helper
and not exported to loadable module. I'm changing the driver to
use dma_request_slave_channel_reason() instead.

Further problems from inspection:

* The remove function must not call kfree on the host pointer,
  because it is allocated together with the mmc_host.

* The clock is never released

* The dma_cap_mask_t is completely unused and can be removed

* deferred probing does not work if the dma driver is loaded
  after the mmc driver.

This patch should fix all of the above.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Jonas Jensen <[email protected]>
---

Notes:
    This is a forward of Arnd's v2 patch.
    
    v2:  do not call clk_put() on an error pointer
    v3:  fix NULL dereference on host->clk
    v4:  rework to use devm_clk_get()
    
    Applies to next-20150113

 drivers/mmc/host/moxart-mmc.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index d2a1ef6..6cb4053 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/blkdev.h>
 #include <linux/dma-mapping.h>
@@ -562,7 +563,6 @@ static int moxart_probe(struct platform_device *pdev)
        struct dma_slave_config cfg;
        struct clk *clk;
        void __iomem *reg_mmc;
-       dma_cap_mask_t mask;
        int irq, ret;
        u32 i;
 
@@ -586,9 +586,9 @@ static int moxart_probe(struct platform_device *pdev)
                goto out;
        }
 
-       clk = of_clk_get(node, 0);
+       clk = devm_clk_get(dev, 0);
        if (IS_ERR(clk)) {
-               dev_err(dev, "of_clk_get failed\n");
+               dev_err(dev, "devm_clk_get failed\n");
                ret = PTR_ERR(clk);
                goto out;
        }
@@ -603,9 +603,6 @@ static int moxart_probe(struct platform_device *pdev)
        if (ret)
                goto out;
 
-       dma_cap_zero(mask);
-       dma_cap_set(DMA_SLAVE, mask);
-
        host = mmc_priv(mmc);
        host->mmc = mmc;
        host->base = reg_mmc;
@@ -613,8 +610,8 @@ static int moxart_probe(struct platform_device *pdev)
        host->timeout = msecs_to_jiffies(1000);
        host->sysclk = clk_get_rate(clk);
        host->fifo_width = readl(host->base + REG_FEATURE) << 2;
-       host->dma_chan_tx = of_dma_request_slave_channel(node, "tx");
-       host->dma_chan_rx = of_dma_request_slave_channel(node, "rx");
+       host->dma_chan_tx = dma_request_slave_channel_reason(dev, "tx");
+       host->dma_chan_rx = dma_request_slave_channel_reason(dev, "rx");
 
        spin_lock_init(&host->lock);
 
@@ -624,6 +621,11 @@ static int moxart_probe(struct platform_device *pdev)
        mmc->ocr_avail = 0xffff00;      /* Support 2.0v - 3.6v power. */
 
        if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) {
+               if (PTR_ERR(host->dma_chan_tx) == -EPROBE_DEFER ||
+                   PTR_ERR(host->dma_chan_rx) == -EPROBE_DEFER) {
+                       ret = -EPROBE_DEFER;
+                       goto out;
+               }
                dev_dbg(dev, "PIO mode transfer enabled\n");
                host->have_dma = false;
        } else {
@@ -702,9 +704,6 @@ static int moxart_remove(struct platform_device *pdev)
                writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
                       host->base + REG_CLOCK_CONTROL);
        }
-
-       kfree(host);
-
        return 0;
 }
 
-- 
1.8.2.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to