Regulators for MMC2 (SD card) are PVDD_TFLASH_2V8 (LDO19) for vmmc and PVDD_APIO_MMCOFF_2V8 (LDO13) for vqmmc. Currently the device tree entry for MMC2 uses PVDD_PRE_1V8 (LDO10) for vmmc and vqmmc is not specified. Fix it.
Without this patch: - "mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators" patch causes a SD card detection to fail - "mmc: dw_mmc: Support voltage changes" patch causes a boot hang This patch fixes both above problems. Suggested-by: Doug Anderson <[email protected]> Cc: Yuvaraj Kumar C D <[email protected]> Cc: Ulf Hansson <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Acked-by: Kyungmin Park <[email protected]> --- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) Index: b/arch/arm/boot/dts/exynos5420-arndale-octa.dts =================================================================== --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts 2014-10-02 15:44:53.014826886 +0200 +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts 2014-10-02 17:35:24.110600398 +0200 @@ -74,7 +74,8 @@ samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - vmmc-supply = <&ldo10_reg>; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; slot@0 { reg = <0>; -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
