On Wednesday, November 28, 2012, Jaehoon Chung wrote:
> On 11/27/2012 05:02 PM, Seungwon Jeon wrote:
> > On Thursday, November 08, 2012, Jaehoon Chung <[email protected]>
> > wrote:
> >> Before disabling clock, need to check whether card is busy on not.
> >>
> >> Signed-off-by: Jaehoon Chung <[email protected]>
> >> ---
> >> drivers/mmc/host/dw_mmc.c | 53
> >> +++++++++++++++++++++++++++-----------------
> >> drivers/mmc/host/dw_mmc.h | 1 +
> >> 2 files changed, 33 insertions(+), 21 deletions(-)
> >>
> >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> >> index 0a80b5c..9704b09 100644
> >> --- a/drivers/mmc/host/dw_mmc.c
> >> +++ b/drivers/mmc/host/dw_mmc.c
> >> @@ -228,6 +228,27 @@ static void dw_mci_set_timeout(struct dw_mci *host)
> >> mci_writel(host, TMOUT, 0xffffffff);
> >> }
> >>
> >> +static bool mci_wait_reset(struct device *dev, struct dw_mci *host)
> >> +{
> >> + unsigned long timeout = jiffies + msecs_to_jiffies(500);
> >> + unsigned int ctrl;
> >> +
> >> + mci_writel(host, CTRL, (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET |
> >> + SDMMC_CTRL_DMA_RESET));
> >> +
> >> + /* wait till resets clear */
> >> + do {
> >> + ctrl = mci_readl(host, CTRL);
> >> + if (!(ctrl & (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET |
> >> + SDMMC_CTRL_DMA_RESET)))
> >> + return true;
> >> + } while (time_before(jiffies, timeout));
> >> +
> >> + dev_err(dev, "Timeout resetting block (ctrl %#x)\n", ctrl);
> >> +
> >> + return false;
> >> +}
> >> +
> >> static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct
> >> mmc_command *cmd)
> >> {
> >> struct mmc_data *data;
> >> @@ -622,6 +643,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
> >> struct dw_mci *host = slot->host;
> >> u32 div;
> >> u32 clk_en_a;
> >> + int timeout = 1000;
> >>
> >> if (slot->clock != host->current_speed) {
> >> div = host->bus_hz / slot->clock;
> >> @@ -638,6 +660,16 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
> >> "Bus speed (slot %d) = %dHz (slot req %dHz, actual
> >> %dHZ"
> >> " div = %d)\n", slot->id, host->bus_hz, slot->clock,
> >> div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div);
> >> + do {
> >> + if (!(mci_readl(host, STATUS) & SDMMC_DATA_BUSY))
> >> + break;
> >> + if (timeout-- < 0) {
> >> + dev_err(host->dev, "Can't disable clock"
> >> + "because Card is busy!!\n");
> >> + return;
> >> + }
> >> + mci_wait_reset(host->dev, host);
> > Should 'mci_wait_reset' be called every loop?
> > Only if card status is still busy at the end of while, one time is enough.
> >
> >> + } while (1);
> > How about counting jiffies for while-loop with usleep_range?
> > do {
> > ...
> > usleep_range(10, 20)
> > } while (time_before())
> Is there reason that use "usleep_range()"?
If we should wait busy status with long time,
it would be better sleep-wait rather than just busy-wait.
Thanks,
Seungwon Jeon
> >
> > Thanks,
> > Seungwon Jeon
> >>
> >> /* disable clock */
> >> mci_writel(host, CLKENA, 0);
> >> @@ -1995,27 +2027,6 @@ no_dma:
> >> return;
> >> }
> >>
> >> -static bool mci_wait_reset(struct device *dev, struct dw_mci *host)
> >> -{
> >> - unsigned long timeout = jiffies + msecs_to_jiffies(500);
> >> - unsigned int ctrl;
> >> -
> >> - mci_writel(host, CTRL, (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET |
> >> - SDMMC_CTRL_DMA_RESET));
> >> -
> >> - /* wait till resets clear */
> >> - do {
> >> - ctrl = mci_readl(host, CTRL);
> >> - if (!(ctrl & (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET |
> >> - SDMMC_CTRL_DMA_RESET)))
> >> - return true;
> >> - } while (time_before(jiffies, timeout));
> >> -
> >> - dev_err(dev, "Timeout resetting block (ctrl %#x)\n", ctrl);
> >> -
> >> - return false;
> >> -}
> >> -
> >> #ifdef CONFIG_OF
> >> static struct dw_mci_of_quirks {
> >> char *quirk;
> >> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> >> index 53b8fd9..4f27357 100644
> >> --- a/drivers/mmc/host/dw_mmc.h
> >> +++ b/drivers/mmc/host/dw_mmc.h
> >> @@ -127,6 +127,7 @@
> >> #define SDMMC_CMD_INDX(n) ((n) & 0x1F)
> >> /* Status register defines */
> >> #define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF)
> >> +#define SDMMC_DATA_BUSY BIT(9)
> >> /* Internal DMAC interrupt defines */
> >> #define SDMMC_IDMAC_INT_AI BIT(9)
> >> #define SDMMC_IDMAC_INT_NI BIT(8)
> >> --
> >> 1.7.4.1
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> >> the body of a message to [email protected]
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
