Jaehoon Chung <[email protected]> wrote:
> On 02/29/2012 03:33 PM, Seungwon Jeon wrote:
>
> > Hi Jaehoon,
> >
> > Thank you for the patch.
> > Could you check comments below?
> >
> > Jaehoon Chung <[email protected]> wrote:
> >> This patch is change to use the sdhci-pltfm.c
> >>
> >> Signed-off-by: Jaehoon Chung <[email protected]>
> >> Signed-off-by: Kyungmin Park <[email protected]>
> >> ---
> >> drivers/mmc/host/Kconfig | 20 ++--
> >> drivers/mmc/host/sdhci-s3c.c | 254
> >> ++++++++++++++----------------------------
> >> 2 files changed, 95 insertions(+), 179 deletions(-)
> >>
> >> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> >> index 0c9b3b1..21ea0ba 100644
> >> --- a/drivers/mmc/host/Kconfig
> >> +++ b/drivers/mmc/host/Kconfig
> >> @@ -169,6 +169,8 @@ config MMC_SDHCI_TEGRA
> >> config MMC_SDHCI_S3C
> >> tristate "SDHCI support on Samsung S3C SoC"
> >> depends on MMC_SDHCI && PLAT_SAMSUNG
> >> + depends on MMC_SDHCI_PLTFM
> >> + select MMC_SDHCI_IO_ACCESSORS
> >> help
> >> This selects the Secure Digital Host Controller Interface (SDHCI)
> >> often referrered to as the HSMMC block in some of the Samsung S3C
> >> @@ -181,6 +183,14 @@ config MMC_SDHCI_S3C
> >>
> >> If unsure, say N.
> >>
> >> +config MMC_SDHCI_S3C_DMA
> >> + bool "DMA support on S3C SDHCI"
> >> + depends on MMC_SDHCI_S3C && EXPERIMENTAL
> >> + help
> >> + Enable DMA support on the Samsung S3C SDHCI glue. The DMA
> >> + has proved to be problematic if the controller encounters
> >> + certain errors, and thus should be treated with care.
> >> +
> >> config MMC_SDHCI_PXAV3
> >> tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
> >> depends on CLKDEV_LOOKUP
> >> @@ -219,16 +229,6 @@ config MMC_SDHCI_SPEAR
> >>
> >> If unsure, say N.
> >>
> >> -config MMC_SDHCI_S3C_DMA
> >> - bool "DMA support on S3C SDHCI"
> >> - depends on MMC_SDHCI_S3C && EXPERIMENTAL
> >> - help
> >> - Enable DMA support on the Samsung S3C SDHCI glue. The DMA
> >> - has proved to be problematic if the controller encounters
> >> - certain errors, and thus should be treated with care.
> >> -
> >> - YMMV.
> >> -
> >> config MMC_OMAP
> >> tristate "TI OMAP Multimedia Card Interface support"
> >> depends on ARCH_OMAP
> >> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> >> index 3bf509b..0778c38 100644
> >> --- a/drivers/mmc/host/sdhci-s3c.c
> >> +++ b/drivers/mmc/host/sdhci-s3c.c
> >> @@ -28,6 +28,7 @@
> >> #include <plat/sdhci.h>
> >> #include <plat/regs-sdhci.h>
> >>
> >> +#include "sdhci-pltfm.h"
> >> #include "sdhci.h"
> >>
> >> #define MAX_BUS_CLK (4)
> >> @@ -46,9 +47,7 @@
> >> * @clk_bus: The clocks that are available for the SD/MMC bus clock.
> >> */
> >> struct sdhci_s3c {
> >> - struct sdhci_host *host;
> >> struct platform_device *pdev;
> >> - struct resource *ioarea;
> >> struct s3c_sdhci_platdata *pdata;
> >> unsigned int cur_clk;
> >> int ext_cd_irq;
> >> @@ -71,11 +70,6 @@ struct sdhci_s3c_drv_data {
> >> unsigned int sdhci_quirks;
> >> };
> >>
> >> -static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
> >> -{
> >> - return sdhci_priv(host);
> >> -}
> >> -
> >> /**
> >> * get_curclk - convert ctrl2 register to clock source number
> >> * @ctrl2: Control2 register value.
> >> @@ -90,7 +84,8 @@ static u32 get_curclk(u32 ctrl2)
> >>
> >> static void sdhci_s3c_check_sclk(struct sdhci_host *host)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> + struct sdhci_s3c *ourhost = pltfm_host->priv;
> >> u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
> >>
> >> if (get_curclk(tmp) != ourhost->cur_clk) {
> >> @@ -110,7 +105,8 @@ static void sdhci_s3c_check_sclk(struct sdhci_host
> >> *host)
> >> */
> >> static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> + struct sdhci_s3c *ourhost = pltfm_host->priv;
> >> struct clk *busclk;
> >> unsigned int rate, max;
> >> int clk;
> >> @@ -138,11 +134,13 @@ static unsigned int sdhci_s3c_get_max_clk(struct
> >> sdhci_host *host)
> >> * @src: The source clock index.
> >> * @wanted: The clock frequency wanted.
> >> */
> >> -static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
> >> +static unsigned int sdhci_s3c_consider_clock(struct sdhci_host *host,
> >> unsigned int src,
> >> unsigned int wanted)
> >> {
> >> unsigned long rate;
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> + struct sdhci_s3c *ourhost = pltfm_host->priv;
> >> struct clk *clksrc = ourhost->clk_bus[src];
> >> int div;
> >>
> >> @@ -153,7 +151,7 @@ static unsigned int sdhci_s3c_consider_clock(struct
> >> sdhci_s3c *ourhost,
> >> * If controller uses a non-standard clock division, find the best clock
> >> * speed possible with selected clock source and skip the division.
> >> */
> >> - if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
> >> + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
> >> rate = clk_round_rate(clksrc, wanted);
> >> return wanted - rate;
> >> }
> >> @@ -181,7 +179,8 @@ static unsigned int sdhci_s3c_consider_clock(struct
> >> sdhci_s3c *ourhost,
> >> */
> >> static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int
> >> clock)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> + struct sdhci_s3c *ourhost = pltfm_host->priv;
> >> unsigned int best = UINT_MAX;
> >> unsigned int delta;
> >> int best_src = 0;
> >> @@ -193,7 +192,7 @@ static void sdhci_s3c_set_clock(struct sdhci_host
> >> *host, unsigned int clock)
> >> return;
> >>
> >> for (src = 0; src < MAX_BUS_CLK; src++) {
> >> - delta = sdhci_s3c_consider_clock(ourhost, src, clock);
> >> + delta = sdhci_s3c_consider_clock(host, src, clock);
> >> if (delta < best) {
> >> best = delta;
> >> best_src = src;
> >> @@ -251,12 +250,11 @@ static void sdhci_s3c_set_clock(struct sdhci_host
> >> *host, unsigned int clock)
> >> */
> >> static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> unsigned int delta, min = UINT_MAX;
> >> int src;
> >>
> >> for (src = 0; src < MAX_BUS_CLK; src++) {
> >> - delta = sdhci_s3c_consider_clock(ourhost, src, 0);
> >> + delta = sdhci_s3c_consider_clock(host, src, 0);
> >> if (delta == UINT_MAX)
> >> continue;
> >> /* delta is a negative value in this case */
> >> @@ -269,27 +267,26 @@ static unsigned int sdhci_s3c_get_min_clock(struct
> >> sdhci_host *host)
> >> /* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
> >> static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >>
> >> - return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX);
> >> + return clk_round_rate(pltfm_host->clk, UINT_MAX);
> >> }
> >>
> >> /* sdhci_cmu_get_min_clock - callback to get minimal supported clock
> >> value. */
> >> static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> -
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> /*
> >> * initial clock can be in the frequency range of
> >> * 100KHz-400KHz, so we set it as max value.
> >> */
> >> - return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000);
> >> + return clk_round_rate(pltfm_host->clk, 400000);
> >> }
> >>
> >> /* sdhci_cmu_set_clock - callback on clock change.*/
> >> static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int
> >> clock)
> >> {
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> unsigned long timeout;
> >> u16 clk = 0;
> >>
> >> @@ -299,7 +296,7 @@ static void sdhci_cmu_set_clock(struct sdhci_host
> >> *host, unsigned int clock)
> >>
> >> sdhci_s3c_set_clock(host, clock);
> >>
> >> - clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
> >> + clk_set_rate(pltfm_host->clk, clock);
> >>
> >> host->clock = clock;
> >>
> >> @@ -426,7 +423,8 @@ static int __devinit sdhci_s3c_parse_dt(struct device
> >> *dev,
> >> struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
> >> {
> >> struct device_node *node = dev->of_node;
> >> - struct sdhci_s3c *ourhost = to_s3c(host);
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> + struct sdhci_s3c *ourhost = pltfm_host->priv;
> >> u32 max_width;
> >> int gpio, cnt, ret;
> >>
> >> @@ -484,6 +482,7 @@ static int __devinit sdhci_s3c_parse_dt(struct device
> >> *dev,
> >> dev_err(dev, "invalid gpio[%d]\n", cnt);
> >> goto err_free_dt_cd_gpio;
> >> }
> >> + p
> > Typo?
>
> It's typo. i will remove it.
>
> >
> >> ourhost->gpios[cnt] = gpio;
> >> }
> >>
> >> @@ -529,62 +528,60 @@ static inline struct sdhci_s3c_drv_data
> >> *sdhci_s3c_get_driver_data(
> >> platform_get_device_id(pdev)->driver_data;
> >> }
> >>
> >> +static struct sdhci_pltfm_data sdhci_s3c_pdata = {
> >> + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
> >> + SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_NO_BUSY_IRQ |
> >> + SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
> >> + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
> >> + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
> >> + SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE,
> >> + .ops = &sdhci_s3c_ops,
> >> +};
> >> +
> >> static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
> >> {
> >> - struct s3c_sdhci_platdata *pdata;
> >> struct sdhci_s3c_drv_data *drv_data;
> >> struct device *dev = &pdev->dev;
> >> + struct sdhci_pltfm_host *pltfm_host;
> >> + struct sdhci_pltfm_data *pltfm_pdata = &sdhci_s3c_pdata;
> >> struct sdhci_host *host;
> >> struct sdhci_s3c *sc;
> >> - struct resource *res;
> >> - int ret, irq, ptr, clks;
> >> + int ret, ptr, clks;
> >>
> >> if (!pdev->dev.platform_data && !pdev->dev.of_node) {
> >> dev_err(dev, "no device data specified\n");
> >> return -ENOENT;
> >> }
> >>
> >> - irq = platform_get_irq(pdev, 0);
> >> - if (irq < 0) {
> >> - dev_err(dev, "no irq specified\n");
> >> - return irq;
> >> - }
> >> -
> >> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> - if (!res) {
> >> - dev_err(dev, "no memory specified\n");
> >> - return -ENOENT;
> >> - }
> >> -
> >> - host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
> >> + host = sdhci_pltfm_init(pdev, pltfm_pdata);
> >> if (IS_ERR(host)) {
> >> dev_err(dev, "sdhci_alloc_host() failed\n");
> >> return PTR_ERR(host);
> >> }
> >> - sc = sdhci_priv(host);
> >>
> >> - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> >> - if (!pdata) {
> >> + sc = devm_kzalloc(dev, sizeof(struct sdhci_s3c), GFP_KERNEL);
> >> + if (!sc) {
> >> ret = -ENOMEM;
> >> - goto err_pdata;
> >> + goto err_alloc_host;
> >> }
> >>
> >> + pltfm_host = sdhci_priv(host);
> >> + pltfm_host->priv = sc;
> >> +
> >> if (pdev->dev.of_node) {
> >> - ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
> >> + ret = sdhci_s3c_parse_dt(&pdev->dev, host, sc->pdata);
> >> if (ret)
> >> - goto err_pdata;
> >> + goto err_alloc_host;
> >> } else {
> >> - memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
> >> + memcpy(&sc->pdata, &pdev->dev.platform_data, sizeof(sc->pdata));
> >> sc->ext_cd_gpio = -1; /* invalid gpio number */
> >> }
> >>
> >> drv_data = sdhci_s3c_get_driver_data(pdev);
> >> + if (drv_data)
> >> + host->quirks |= drv_data->sdhci_quirks;
> >>
> >> - sc->host = host;
> >> sc->pdev = pdev;
> >> - sc->pdata = pdata;
> >> -
> >> - platform_set_drvdata(pdev, host);
> >>
> >> sc->clk_io = clk_get(dev, "hsmmc");
> >> if (IS_ERR(sc->clk_io)) {
> >> @@ -602,9 +599,8 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >>
> >> snprintf(name, 14, "mmc_busclk.%d", ptr);
> >> clk = clk_get(dev, name);
> >> - if (IS_ERR(clk)) {
> >> + if (IS_ERR(clk))
> >> continue;
> >> - }
> >>
> >> clks++;
> >> sc->clk_bus[ptr] = clk;
> >> @@ -613,7 +609,10 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >> * save current clock index to know which clock bus
> >> * is used later in overriding functions.
> >> */
> >> - sc->cur_clk = ptr;
> >> + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
> >> + pltfm_host->clk = clk;
> >> + else
> > We need to keep below?
> > According to two commits, this seems to be relevant to
> > SDHCI_QUIRK_NONSTANDARD_CLOCK.
> > mmc: sdhci-s3c: Support controllers with no internal clock
> > divider(253e0a7c3dc4b)
> > mmc: sdhci-s3c: Remove usage of clk_type member in platform
> > data(b77d777eeb0a086)
>
> Right, it's related with them.
> I want to remove the sc->cur_clk.But in c110 case, it seems to need them.
> In c110, clk_src is used the one of four.
> If you want to remove the quirks, i will use only sc->cur_clk.
> How about this?
I mean "sc->cur_clk = ptr" can be removed here.
And about quirks..., I think compatibility should be considered.
Thanks,
Seungwon Jeon.
>
> And any comment?
>
> Best Regards,
> Jaehoon Chung
>
> >
> > Thanks,
> > Seungwon Jeon.
> >
> >> + sc->cur_clk = ptr;
> >>
> >> clk_enable(clk);
> >>
> >> @@ -627,63 +626,25 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >> goto err_no_busclks;
> >> }
> >>
> >> - sc->ioarea = request_mem_region(res->start, resource_size(res),
> >> - mmc_hostname(host->mmc));
> >> - if (!sc->ioarea) {
> >> - dev_err(dev, "failed to reserve register area\n");
> >> - ret = -ENXIO;
> >> - goto err_req_regs;
> >> - }
> >> -
> >> - host->ioaddr = ioremap_nocache(res->start, resource_size(res));
> >> - if (!host->ioaddr) {
> >> - dev_err(dev, "failed to map registers\n");
> >> - ret = -ENXIO;
> >> - goto err_req_regs;
> >> - }
> >> -
> >> /* Ensure we have minimal gpio selected CMD/CLK/Detect */
> >> - if (pdata->cfg_gpio)
> >> - pdata->cfg_gpio(pdev, pdata->max_width);
> >> -
> >> - host->hw_name = "samsung-hsmmc";
> >> - host->ops = &sdhci_s3c_ops;
> >> - host->quirks = 0;
> >> - host->irq = irq;
> >> -
> >> - /* Setup quirks for the controller */
> >> - host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
> >> - host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
> >> - if (drv_data)
> >> - host->quirks |= drv_data->sdhci_quirks;
> >> + if (sc->pdata->cfg_gpio)
> >> + sc->pdata->cfg_gpio(pdev, sc->pdata->max_width);
> >>
> >> #ifndef CONFIG_MMC_SDHCI_S3C_DMA
> >> -
> >> /* we currently see overruns on errors, so disable the SDMA
> >> * support as well. */
> >> host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
> >>
> >> #endif /* CONFIG_MMC_SDHCI_S3C_DMA */
> >>
> >> - /* It seems we do not get an DATA transfer complete on non-busy
> >> - * transfers, not sure if this is a problem with this specific
> >> - * SDHCI block, or a missing configuration that needs to be set. */
> >> - host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
> >> -
> >> - /* This host supports the Auto CMD12 */
> >> - host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
> >> -
> >> - /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
> >> - host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
> >> -
> >> - if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
> >> - pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
> >> + if (sc->pdata->cd_type == S3C_SDHCI_CD_NONE ||
> >> + sc->pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
> >> host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
> >>
> >> - if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
> >> + if (sc->pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
> >> host->mmc->caps = MMC_CAP_NONREMOVABLE;
> >>
> >> - switch (pdata->max_width) {
> >> + switch (sc->pdata->max_width) {
> >> case 8:
> >> host->mmc->caps |= MMC_CAP_8_BIT_DATA;
> >> case 4:
> >> @@ -691,17 +652,12 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >> break;
> >> }
> >>
> >> - if (pdata->host_caps)
> >> - host->mmc->caps |= pdata->host_caps;
> >> -
> >> - if (pdata->pm_caps)
> >> - host->mmc->pm_caps |= pdata->pm_caps;
> >> -
> >> - host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
> >> - SDHCI_QUIRK_32BIT_DMA_SIZE);
> >> + /* It supports additional host capabilities if needed */
> >> + if (sc->pdata->host_caps)
> >> + host->mmc->caps |= sc->pdata->host_caps;
> >>
> >> - /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
> >> - host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
> >> + if (sc->pdata->pm_caps)
> >> + host->mmc->pm_caps |= sc->pdata->pm_caps;
> >>
> >> /*
> >> * If controller does not have internal clock divider,
> >> @@ -713,10 +669,6 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >> sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
> >> }
> >>
> >> - /* It supports additional host capabilities if needed */
> >> - if (pdata->host_caps)
> >> - host->mmc->caps |= pdata->host_caps;
> >> -
> >> ret = sdhci_add_host(host);
> >> if (ret) {
> >> dev_err(dev, "sdhci_add_host() failed\n");
> >> @@ -726,38 +678,35 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >> /* The following two methods of card detection might call
> >> sdhci_s3c_notify_change() immediately, so they can be called
> >> only after sdhci_add_host(). Setup errors are ignored. */
> >> - if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
> >> - pdata->ext_cd_init(&sdhci_s3c_notify_change);
> >> - if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
> >> - gpio_is_valid(pdata->ext_cd_gpio))
> >> + if (sc->pdata->cd_type == S3C_SDHCI_CD_EXTERNAL &&
> >> + sc->pdata->ext_cd_init)
> >> + sc->pdata->ext_cd_init(&sdhci_s3c_notify_change);
> >> + if (sc->pdata->cd_type == S3C_SDHCI_CD_GPIO &&
> >> + gpio_is_valid(sc->pdata->ext_cd_gpio))
> >> sdhci_s3c_setup_card_detect_gpio(sc);
> >>
> >> return 0;
> >>
> >> - err_add_host:
> >> - release_resource(sc->ioarea);
> >> - kfree(sc->ioarea);
> >> -
> >> - err_req_regs:
> >> +err_add_host:
> >> for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
> >> if (sc->clk_bus[ptr]) {
> >> clk_disable(sc->clk_bus[ptr]);
> >> clk_put(sc->clk_bus[ptr]);
> >> }
> >> }
> >> -
> >> - err_no_busclks:
> >> +err_no_busclks:
> >> clk_disable(sc->clk_io);
> >> clk_put(sc->clk_io);
> >>
> >> - err_io_clk:
> >> +err_io_clk:
> >> for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
> >> gpio_free(sc->gpios[ptr]);
> >> - if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
> >> + if (sc->pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
> >> gpio_free(sc->ext_cd_gpio);
> >>
> >> - err_pdata:
> >> - sdhci_free_host(host);
> >> +err_alloc_host:
> >> + sdhci_pltfm_free(pdev);
> >> + dev_err(&pdev->dev, "%s failed %d\n", __func__, ret);
> >>
> >> return ret;
> >> }
> >> @@ -765,12 +714,13 @@ static int __devinit sdhci_s3c_probe(struct
> >> platform_device *pdev)
> >> static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
> >> {
> >> struct sdhci_host *host = platform_get_drvdata(pdev);
> >> - struct sdhci_s3c *sc = sdhci_priv(host);
> >> - struct s3c_sdhci_platdata *pdata = sc->pdata;
> >> - int ptr;
> >> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> >> + struct sdhci_s3c *sc = pltfm_host->priv;
> >> + int ptr, ret;
> >>
> >> - if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
> >> - pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
> >> + if (sc->pdata->cd_type == S3C_SDHCI_CD_EXTERNAL &&
> >> + sc->pdata->ext_cd_cleanup)
> >> + sc->pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
> >>
> >> if (sc->ext_cd_irq)
> >> free_irq(sc->ext_cd_irq, sc);
> >> @@ -778,9 +728,9 @@ static int __devexit sdhci_s3c_remove(struct
> >> platform_device *pdev)
> >> if (gpio_is_valid(sc->ext_cd_gpio))
> >> gpio_free(sc->ext_cd_gpio);
> >>
> >> - sdhci_remove_host(host, 1);
> >> + ret = sdhci_pltfm_unregister(pdev);
> >>
> >> - for (ptr = 0; ptr < 3; ptr++) {
> >> + for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
> >> if (sc->clk_bus[ptr]) {
> >> clk_disable(sc->clk_bus[ptr]);
> >> clk_put(sc->clk_bus[ptr]);
> >> @@ -789,48 +739,14 @@ static int __devexit sdhci_s3c_remove(struct
> >> platform_device *pdev)
> >> clk_disable(sc->clk_io);
> >> clk_put(sc->clk_io);
> >>
> >> - iounmap(host->ioaddr);
> >> - release_resource(sc->ioarea);
> >> - kfree(sc->ioarea);
> >> -
> >> if (pdev->dev.of_node) {
> >> for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
> >> gpio_free(sc->gpios[ptr]);
> >> }
> >>
> >> - sdhci_free_host(host);
> >> - platform_set_drvdata(pdev, NULL);
> >> -
> >> - return 0;
> >> -}
> >> -
> >> -#ifdef CONFIG_PM
> >> -
> >> -static int sdhci_s3c_suspend(struct device *dev)
> >> -{
> >> - struct sdhci_host *host = dev_get_drvdata(dev);
> >> -
> >> - return sdhci_suspend_host(host);
> >> -}
> >> -
> >> -static int sdhci_s3c_resume(struct device *dev)
> >> -{
> >> - struct sdhci_host *host = dev_get_drvdata(dev);
> >> -
> >> - return sdhci_resume_host(host);
> >> + return ret;
> >> }
> >>
> >> -static const struct dev_pm_ops sdhci_s3c_pmops = {
> >> - .suspend = sdhci_s3c_suspend,
> >> - .resume = sdhci_s3c_resume,
> >> -};
> >> -
> >> -#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
> >> -
> >> -#else
> >> -#define SDHCI_S3C_PMOPS NULL
> >> -#endif
> >> -
> >> #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
> >> static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
> >> .sdhci_quirks = SDHCI_QUIRK_NONSTANDARD_CLOCK,
> >> @@ -870,7 +786,7 @@ static struct platform_driver sdhci_s3c_driver = {
> >> .owner = THIS_MODULE,
> >> .name = "s3c-sdhci",
> >> .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
> >> - .pm = SDHCI_S3C_PMOPS,
> >> + .pm = SDHCI_PLTFM_PMOPS,
> >> },
> >> };
> >>
> >> --
> >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> >> the body of a message to [email protected]
> >> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
