The patch titled
sdhci: improve sdhci sdhci_set_adma_desc() code
has been added to the -mm tree. Its filename is
sdhci-improve-sdhci-sdhci_set_adma_desc-code.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/SubmitChecklist when testing your code ***
See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
out what to do about this
The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
------------------------------------------------------
Subject: sdhci: improve sdhci sdhci_set_adma_desc() code
From: Ben Dooks <[email protected]>
sdhci_set_adma_desc() is using byte-writes to write data in a specified
order into memory. Change to using __le16 for the two byte and __le32 for
the four byte cases and use the cpu_to_{le16,le32} to do the conversion
before writing.
This will reduce the size of the code and the number of writes as we no
longer need to chop the data up before writing.
As an example on ARM S3C64XX SoC, in little-endian configuration:
000000d4 <sdhci_set_adma_desc>:
- d8: e1a0c423 lsr ip, r3, #8
- dc: e1a0ec21 lsr lr, r1, #24
- e0: e1a04821 lsr r4, r1, #16
- e4: e1a05421 lsr r5, r1, #8
- e8: e1a06442 asr r6, r2, #8
- ec: e5c0c001 strb ip, [r0, #1]
- f0: e5c0e007 strb lr, [r0, #7]
- f4: e5c04006 strb r4, [r0, #6]
- f8: e5c05005 strb r5, [r0, #5]
- fc: e5c01004 strb r1, [r0, #4]
- 100: e5c06003 strb r6, [r0, #3]
- 104: e5c02002 strb r2, [r0, #2]
- 108: e5c03000 strb r3, [r0]
+ d4: e5801004 str r1, [r0, #4]
+ d8: e1c030b0 strh r3, [r0]
+ dc: e1c020b2 strh r2, [r0, #2]
Signed-off-by: Ben Dooks <[email protected]>
Cc: Pierre Ossman <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
drivers/mmc/host/sdhci.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff -puN drivers/mmc/host/sdhci.c~sdhci-improve-sdhci-sdhci_set_adma_desc-code
drivers/mmc/host/sdhci.c
--- a/drivers/mmc/host/sdhci.c~sdhci-improve-sdhci-sdhci_set_adma_desc-code
+++ a/drivers/mmc/host/sdhci.c
@@ -378,16 +378,16 @@ static void sdhci_kunmap_atomic(void *bu
static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
{
- desc[7] = (addr >> 24) & 0xff;
- desc[6] = (addr >> 16) & 0xff;
- desc[5] = (addr >> 8) & 0xff;
- desc[4] = (addr >> 0) & 0xff;
+ __le32 *dataddr = (__le32 __force *)(desc + 4);
+ __le16 *cmdlen = (__le16 __force *)desc;
- desc[3] = (len >> 8) & 0xff;
- desc[2] = (len >> 0) & 0xff;
+ /* SDHCI specification says ADMA descriptors should be 4 byte
+ * aligned, so using 16 or 32bit operations should be safe. */
- desc[0] = cmd & 0xff;
- desc[1] = cmd >> 8;
+ cmdlen[0] = cpu_to_le16(cmd);
+ cmdlen[1] = cpu_to_le16(len);
+
+ dataddr[0] = cpu_to_le32(addr);
}
static int sdhci_adma_table_pre(struct sdhci_host *host,
_
Patches currently in -mm which might be from [email protected] are
origin.patch
linux-next.patch
sdhci-add-adma-descriptor-set-call.patch
sdhci-improve-sdhci-sdhci_set_adma_desc-code.patch
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
