On 07/07/2016 12:59 AM, Steve Longerbeam wrote:
> Add a device tree boolean property "bt656-4" to allow setting
> the ITU-R BT.656-4 compatible bit.
> 
> Signed-off-by: Steve Longerbeam <steve_longerb...@mentor.com>

Hi,

Thanks for the patch.

> ---
>  drivers/media/i2c/adv7180.c | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
> index 92e2f37..fff887c 100644
> --- a/drivers/media/i2c/adv7180.c
> +++ b/drivers/media/i2c/adv7180.c
> @@ -58,7 +58,7 @@
>  
>  #define ADV7180_REG_OUTPUT_CONTROL                   0x0003
>  #define ADV7180_REG_EXTENDED_OUTPUT_CONTROL          0x0004
> -#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS              0xC5
> +#define ADV7180_EXTENDED_OUTPUT_CONTROL_BT656_4              0x80
>  
>  #define ADV7180_REG_AUTODETECT_ENABLE                        0x0007
>  #define ADV7180_AUTODETECT_DEFAULT                   0x7f
> @@ -216,6 +216,7 @@ struct adv7180_state {
>       struct gpio_desc        *pwdn_gpio;
>       v4l2_std_id             curr_norm;
>       bool                    autodetect;
> +     bool                    bt656_4; /* use bt.656-4 standard for NTSC */
>       bool                    powered;
>       u8                      input;
>  
> @@ -1281,6 +1282,17 @@ static int init_device(struct adv7180_state *state)
>       if (ret)
>               goto out_unlock;
>  
> +     if (state->bt656_4) {
> +             ret = adv7180_read(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL);
> +             if (ret < 0)
> +                     goto out_unlock;
> +             ret |= ADV7180_EXTENDED_OUTPUT_CONTROL_BT656_4;
> +             ret = adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
> +                                 ret);
> +             if (ret < 0)
> +                     goto out_unlock;
> +     }
> +
>       ret = adv7180_program_std(state);
>       if (ret)
>               goto out_unlock;
> @@ -1332,6 +1344,10 @@ static int adv7180_of_parse(struct adv7180_state 
> *state)
>               return PTR_ERR(state->pwdn_gpio);
>       }
>  
> +     /* select ITU-R BT.656-4 compatible? */
> +     if (of_property_read_bool(client->dev.of_node, "bt656-4"))
> +             state->bt656_4 = true;

This property needs to be documented. In my opinion it should also be a
property of the endpoint sub-node rather than the toplevel device node since
this is a configuration of the endpoint format.

> +
>       return 0;
>  }
>  
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to