Hi Nick,
On Wed, Jun 22, 2016 at 11:08:32PM +0100, Nick Dyer wrote:
> Function 54 implements access to various RMI4 diagnostic features.
>
> This patch adds support for retrieving this data. It registers a V4L2
> device to output the data to user space.
>
> Signed-off-by: Nick Dyer <nick.d...@itdev.co.uk>
> ---
> drivers/input/rmi4/Kconfig | 11 +
> drivers/input/rmi4/Makefile | 1 +
> drivers/input/rmi4/rmi_bus.c | 3 +
> drivers/input/rmi4/rmi_driver.h | 1 +
> drivers/input/rmi4/rmi_f54.c | 730
> ++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 746 insertions(+)
> create mode 100644 drivers/input/rmi4/rmi_f54.c
>
> diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
> index f73df24..f3418b6 100644
> --- a/drivers/input/rmi4/Kconfig
> +++ b/drivers/input/rmi4/Kconfig
> @@ -61,3 +61,14 @@ config RMI4_F30
>
> Function 30 provides GPIO and LED support for RMI4 devices. This
> includes support for buttons on TouchPads and ClickPads.
> +
> +config RMI4_F54
> + bool "RMI4 Function 54 (Analog diagnostics)"
> + depends on RMI4_CORE
> + depends on VIDEO_V4L2
> + select VIDEOBUF2_VMALLOC
> + help
> + Say Y here if you want to add support for RMI4 function 54
> +
> + Function 54 provides access to various diagnostic features in certain
> + RMI4 touch sensors.
> diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
> index 95c00a7..0bafc85 100644
> --- a/drivers/input/rmi4/Makefile
> +++ b/drivers/input/rmi4/Makefile
> @@ -7,6 +7,7 @@ rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
> rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
> rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
> rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
> +rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
>
> # Transports
> obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
> diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
> index b368b05..3aedc65 100644
> --- a/drivers/input/rmi4/rmi_bus.c
> +++ b/drivers/input/rmi4/rmi_bus.c
> @@ -315,6 +315,9 @@ static struct rmi_function_handler *fn_handlers[] = {
> #ifdef CONFIG_RMI4_F30
> &rmi_f30_handler,
> #endif
> +#ifdef CONFIG_RMI4_F54
> + &rmi_f54_handler,
> +#endif
> };
>
> static void __rmi_unregister_function_handlers(int start_idx)
> diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
> index 6e140fa..8dfbebe 100644
> --- a/drivers/input/rmi4/rmi_driver.h
> +++ b/drivers/input/rmi4/rmi_driver.h
> @@ -102,4 +102,5 @@ extern struct rmi_function_handler rmi_f01_handler;
> extern struct rmi_function_handler rmi_f11_handler;
> extern struct rmi_function_handler rmi_f12_handler;
> extern struct rmi_function_handler rmi_f30_handler;
> +extern struct rmi_function_handler rmi_f54_handler;
> #endif
> diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
> new file mode 100644
> index 0000000..df4c821
> --- /dev/null
> +++ b/drivers/input/rmi4/rmi_f54.c
> @@ -0,0 +1,730 @@
> +/*
> + * Copyright (c) 2012-2015 Synaptics Incorporated
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> by
> + * the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/rmi.h>
> +#include <linux/input.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <media/videobuf2-vmalloc.h>
> +#include "rmi_driver.h"
> +
> +#define F54_NAME "rmi4_f54"
> +
> +/* F54 data offsets */
> +#define F54_REPORT_DATA_OFFSET 3
> +#define F54_FIFO_OFFSET 1
> +#define F54_NUM_TX_OFFSET 1
> +#define F54_NUM_RX_OFFSET 0
> +
> +/* F54 commands */
> +#define F54_GET_REPORT 1
> +#define F54_FORCE_CAL 2
> +
> +/* Fixed sizes of reports */
> +#define F54_QUERY_LEN 27
> +
> +/* F54 capabilities */
> +#define F54_CAP_BASELINE (1 << 2)
> +#define F54_CAP_IMAGE8 (1 << 3)
> +#define F54_CAP_IMAGE16 (1 << 6)
> +
> +enum rmi_f54_report_type {
> + F54_REPORT_NONE = 0,
> + F54_8BIT_IMAGE = 1,
> + F54_16BIT_IMAGE = 2,
> + F54_RAW_16BIT_IMAGE = 3,
> + F54_TRUE_BASELINE = 9,
> + F54_FULL_RAW_CAP = 19,
> + F54_FULL_RAW_CAP_RX_COUPLING_COMP = 20,
> + F54_MAX_REPORT_TYPE,
> +};
> +
> +const char *rmi_f54_report_type_names[] = {
> + [F54_REPORT_NONE] = "No report",
> + [F54_8BIT_IMAGE] = "8 bit image",
> + [F54_16BIT_IMAGE] = "16 bit image",
> + [F54_RAW_16BIT_IMAGE] = "Raw 16 bit image",
> + [F54_TRUE_BASELINE] = "True baseline",
> + [F54_FULL_RAW_CAP] = "Full raw cap",
> + [F54_FULL_RAW_CAP_RX_COUPLING_COMP]
> + = "Full raw cap RX coupling comp",
> + [F54_MAX_REPORT_TYPE] = "Max report type",
> +};
> +
> +#define f54_reptype_name(a) (((unsigned)(a)) <
> ARRAY_SIZE(rmi_f54_report_type_names) ? rmi_f54_report_type_names[a] :
> "unknown")
> +
> +struct rmi_f54_reports {
> + int start;
> + int size;
> +};
> +
> +struct f54_data {
> + struct rmi_function *fn;
> +
> + u8 qry[F54_QUERY_LEN];
> + u8 num_rx_electrodes;
> + u8 num_tx_electrodes;
> + u8 capabilities;
> + u16 clock_rate;
> + u8 family;
> +
> + enum rmi_f54_report_type report_type;
> + u8 *report_data;
> + int report_size;
> + struct rmi_f54_reports standard_report[2];
> +
> + bool is_busy;
> + struct mutex status_mutex;
> + struct mutex data_mutex;
> +
> + struct workqueue_struct *workqueue;
> + struct delayed_work work;
> + unsigned long timeout;
> +
> + struct completion cmd_done;
> +
> + /* V4L2 support */
> + struct v4l2_device v4l2;
> + struct v4l2_pix_format format;
> + struct video_device vdev;
> + struct vb2_queue queue;
> + struct mutex lock;
> + int input;
> + enum rmi_f54_report_type inputs[F54_MAX_REPORT_TYPE];
> +};
> +
> +/*
> + * Basic checks on report_type to ensure we write a valid type
> + * to the sensor.
> + */
> +static bool is_f54_report_type_valid(struct f54_data *f54,
> + enum rmi_f54_report_type reptype)
> +{
> + switch (reptype) {
> + case F54_8BIT_IMAGE:
> + return f54->capabilities & F54_CAP_IMAGE8;
> + case F54_16BIT_IMAGE:
> + case F54_RAW_16BIT_IMAGE:
> + return f54->capabilities & F54_CAP_IMAGE16;
> + case F54_TRUE_BASELINE:
> + return f54->capabilities & F54_CAP_IMAGE16;
> + case F54_FULL_RAW_CAP:
> + case F54_FULL_RAW_CAP_RX_COUPLING_COMP:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static enum rmi_f54_report_type rmi_f54_get_reptype(struct f54_data *f54,
> + unsigned int i)
> +{
> + if (i >= F54_MAX_REPORT_TYPE)
> + return F54_REPORT_NONE;
> +
> + return f54->inputs[i];
> +}
> +
> +static void rmi_f54_create_input_map(struct f54_data *f54)
> +{
> + int i = 0;
> + enum rmi_f54_report_type reptype;
> +
> + for (reptype = 1; reptype < F54_MAX_REPORT_TYPE; reptype++) {
> + if (!is_f54_report_type_valid(f54, reptype))
> + continue;
> +
> + f54->inputs[i++] = reptype;
> + }
> +
> + /* Remaining values are zero via kzalloc */
> +}
> +
> +static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
> +{
> + struct f54_data *f54 = dev_get_drvdata(&fn->dev);
> + struct rmi_device *rmi_dev = fn->rmi_dev;
> + int error;
> +
> + /* Write Report Type into F54_AD_Data0 */
> + if (f54->report_type != report_type) {
> + error = rmi_write(rmi_dev, f54->fn->fd.data_base_addr,
> + report_type);
> + if (error)
> + return error;
> + f54->report_type = report_type;
> + }
> +
> + /*
> + * Small delay after disabling interrupts to avoid race condition
> + * in firmare. This value is a bit higher than absolutely necessary.
> + * Should be removed once issue is resolved in firmware.
> + */
> + usleep_range(2000, 3000);
> +
> + mutex_lock(&f54->data_mutex);
> +
> + error = rmi_write(rmi_dev, fn->fd.command_base_addr, F54_GET_REPORT);
> + if (error < 0)
> + return error;
> +
> + init_completion(&f54->cmd_done);
> +
> + f54->is_busy = 1;
f54->is_busy = true;
> + f54->timeout = jiffies + msecs_to_jiffies(100);
> +
> + queue_delayed_work(f54->workqueue, &f54->work, 0);
> +
> + mutex_unlock(&f54->data_mutex);
> +
> + return 0;
> +}
> +
> +static size_t rmi_f54_get_report_size(struct f54_data *f54)
> +{
> + u8 rx = f54->num_rx_electrodes ? : f54->num_rx_electrodes;
> + u8 tx = f54->num_tx_electrodes ? : f54->num_tx_electrodes;
> + size_t size;
> +
> + switch (rmi_f54_get_reptype(f54, f54->input)) {
> + case F54_8BIT_IMAGE:
> + size = rx * tx;
> + break;
> + case F54_16BIT_IMAGE:
> + case F54_RAW_16BIT_IMAGE:
> + case F54_TRUE_BASELINE:
> + case F54_FULL_RAW_CAP:
> + case F54_FULL_RAW_CAP_RX_COUPLING_COMP:
> + size = sizeof(u16) * rx * tx;
> + break;
> + default:
> + size = 0;
> + }
> +
> + return size;
> +}
> +
> +static int rmi_f54_get_pixel_fmt(enum rmi_f54_report_type reptype, u32
> *pixfmt)
> +{
> + int ret = 0;
> +
> + switch (reptype) {
> + case F54_8BIT_IMAGE:
> + *pixfmt = V4L2_TCH_FMT_DELTA_TD08;
> + break;
> +
> + case F54_16BIT_IMAGE:
> + *pixfmt = V4L2_TCH_FMT_DELTA_TD16;
> + break;
> +
> + case F54_RAW_16BIT_IMAGE:
> + case F54_TRUE_BASELINE:
> + case F54_FULL_RAW_CAP:
> + case F54_FULL_RAW_CAP_RX_COUPLING_COMP:
> + *pixfmt = V4L2_TCH_FMT_TU16;
> + break;
> +
> + case F54_REPORT_NONE:
> + case F54_MAX_REPORT_TYPE:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct v4l2_file_operations rmi_f54_video_fops = {
> + .owner = THIS_MODULE,
> + .open = v4l2_fh_open,
> + .release = vb2_fop_release,
> + .unlocked_ioctl = video_ioctl2,
> + .read = vb2_fop_read,
> + .mmap = vb2_fop_mmap,
> + .poll = vb2_fop_poll,
> +};
> +
> +static int rmi_f54_queue_setup(struct vb2_queue *q,
> + unsigned int *nbuffers, unsigned int *nplanes,
> + unsigned int sizes[], void *alloc_ctxs[])
> +{
> + struct f54_data *f54 = q->drv_priv;
> +
> + if (*nplanes)
> + return sizes[0] < rmi_f54_get_report_size(f54) ? -EINVAL : 0;
> +
> + *nplanes = 1;
> + sizes[0] = rmi_f54_get_report_size(f54);
> +
> + return 0;
> +}
> +
> +static void rmi_f54_buffer_queue(struct vb2_buffer *vb)
> +{
> + struct f54_data *f54 = vb2_get_drv_priv(vb->vb2_queue);
> + u16 *ptr;
> + enum vb2_buffer_state state;
> + enum rmi_f54_report_type reptype;
> + int ret;
> +
> + mutex_lock(&f54->status_mutex);
> +
> + reptype = rmi_f54_get_reptype(f54, f54->input);
> + if (reptype == F54_REPORT_NONE) {
> + state = VB2_BUF_STATE_ERROR;
> + goto done;
> + }
> +
> + if (f54->is_busy) {
> + state = VB2_BUF_STATE_ERROR;
> + goto done;
> + }
> +
> + ret = rmi_f54_request_report(f54->fn, reptype);
> + if (ret) {
> + dev_err(&f54->fn->dev, "Error requesting F54 report\n");
> + state = VB2_BUF_STATE_ERROR;
> + goto done;
> + }
> +
> + /* get frame data */
> + mutex_lock(&f54->data_mutex);
> +
> + while (f54->is_busy) {
> + mutex_unlock(&f54->data_mutex);
> + if (!wait_for_completion_timeout(&f54->cmd_done,
> + msecs_to_jiffies(1000))) {
> + dev_err(&f54->fn->dev, "Timed out\n");
> + state = VB2_BUF_STATE_ERROR;
> + goto done;
> + }
> + mutex_lock(&f54->data_mutex);
> + }
> +
> + ptr = vb2_plane_vaddr(vb, 0);
> + if (!ptr) {
> + dev_err(&f54->fn->dev, "Error acquiring frame ptr\n");
> + state = VB2_BUF_STATE_ERROR;
> + goto data_done;
> + }
> +
> + memcpy(ptr, f54->report_data, f54->report_size);
> + vb2_set_plane_payload(vb, 0, rmi_f54_get_report_size(f54));
> + state = VB2_BUF_STATE_DONE;
> +
> +data_done:
> + mutex_unlock(&f54->data_mutex);
> +done:
> + vb2_buffer_done(vb, state);
> + mutex_unlock(&f54->status_mutex);
> +}
> +
> +/* V4L2 structures */
> +static const struct vb2_ops rmi_f54_queue_ops = {
> + .queue_setup = rmi_f54_queue_setup,
> + .buf_queue = rmi_f54_buffer_queue,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> +};
> +
> +static const struct vb2_queue rmi_f54_queue = {
> + .type = V4L2_BUF_TYPE_TOUCH_CAPTURE,
> + .io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ,
> + .buf_struct_size = sizeof(struct vb2_buffer),
> + .ops = &rmi_f54_queue_ops,
> + .mem_ops = &vb2_vmalloc_memops,
> + .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
> + .min_buffers_needed = 1,
> +};
> +
> +static int rmi_f54_vidioc_querycap(struct file *file, void *priv,
> + struct v4l2_capability *cap)
> +{
> + struct f54_data *f54 = video_drvdata(file);
> +
> + strlcpy(cap->driver, F54_NAME, sizeof(cap->driver));
> + strlcpy(cap->card, SYNAPTICS_INPUT_DEVICE_NAME, sizeof(cap->card));
> + strlcpy(cap->bus_info, dev_name(&f54->fn->dev), sizeof(cap->bus_info));
> +
> + return 0;
> +}
> +
> +static int rmi_f54_vidioc_enum_input(struct file *file, void *priv,
> + struct v4l2_input *i)
> +{
> + struct f54_data *f54 = video_drvdata(file);
> + enum rmi_f54_report_type reptype;
> +
> + reptype = rmi_f54_get_reptype(f54, i->index);
> + if (reptype == F54_REPORT_NONE)
> + return -EINVAL;
> +
> + i->type = V4L2_INPUT_TYPE_TOUCH;
> + strlcpy(i->name, f54_reptype_name(reptype), sizeof(i->name));
> + return 0;
> +}
> +
> +static int rmi_f54_set_input(struct f54_data *f54, unsigned int i)
> +{
> + struct v4l2_pix_format *f = &f54->format;
> + enum rmi_f54_report_type reptype;
> + int ret;
> +
> + reptype = rmi_f54_get_reptype(f54, i);
> + if (reptype == F54_REPORT_NONE)
> + return -EINVAL;
> +
> + ret = rmi_f54_get_pixel_fmt(reptype, &f->pixelformat);
> + if (ret)
> + return ret;
> +
> + f54->input = i;
> +
> + f->width = f54->num_rx_electrodes;
> + f->height = f54->num_tx_electrodes;
> + f->field = V4L2_FIELD_NONE;
> + f->colorspace = V4L2_COLORSPACE_RAW;
> + f->bytesperline = f->width * sizeof(u16);
> + f->sizeimage = f->width * f->height * sizeof(u16);
> +
> + return 0;
> +}
> +
> +static int rmi_f54_vidioc_s_input(struct file *file, void *priv, unsigned
> int i)
> +{
> + return rmi_f54_set_input(video_drvdata(file), i);
> +}
> +
> +static int rmi_f54_vidioc_g_input(struct file *file, void *priv,
> + unsigned int *i)
> +{
> + struct f54_data *f54 = video_drvdata(file);
> +
> + *i = f54->input;
> +
> + return 0;
> +}
> +
> +static int rmi_f54_vidioc_fmt(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct f54_data *f54 = video_drvdata(file);
> +
> + f->fmt.pix = f54->format;
> +
> + return 0;
> +}
> +
> +static int rmi_f54_vidioc_enum_fmt(struct file *file, void *priv,
> + struct v4l2_fmtdesc *fmt)
> +{
> + if (fmt->type != V4L2_BUF_TYPE_TOUCH_CAPTURE)
> + return -EINVAL;
> +
> + switch (fmt->index) {
> + case 0:
> + fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD16;
> + break;
> +
> + case 1:
> + fmt->pixelformat = V4L2_TCH_FMT_DELTA_TD08;
> + break;
> +
> + case 2:
> + fmt->pixelformat = V4L2_TCH_FMT_TU16;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int rmi_f54_vidioc_g_parm(struct file *file, void *fh,
> + struct v4l2_streamparm *a)
> +{
> + if (a->type != V4L2_BUF_TYPE_TOUCH_CAPTURE)
> + return -EINVAL;
> +
> + a->parm.capture.readbuffers = 1;
> + a->parm.capture.timeperframe.numerator = 1;
> + a->parm.capture.timeperframe.denominator = 10;
> + return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops rmi_f54_video_ioctl_ops = {
> + .vidioc_querycap = rmi_f54_vidioc_querycap,
> +
> + .vidioc_enum_fmt_vid_cap = rmi_f54_vidioc_enum_fmt,
> + .vidioc_s_fmt_vid_cap = rmi_f54_vidioc_fmt,
> + .vidioc_g_fmt_vid_cap = rmi_f54_vidioc_fmt,
> + .vidioc_try_fmt_vid_cap = rmi_f54_vidioc_fmt,
> + .vidioc_g_parm = rmi_f54_vidioc_g_parm,
> +
> + .vidioc_enum_input = rmi_f54_vidioc_enum_input,
> + .vidioc_g_input = rmi_f54_vidioc_g_input,
> + .vidioc_s_input = rmi_f54_vidioc_s_input,
> +
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_expbuf = vb2_ioctl_expbuf,
> +
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> +};
> +
> +static const struct video_device rmi_f54_video_device = {
> + .name = "Synaptics RMI4",
> + .fops = &rmi_f54_video_fops,
> + .ioctl_ops = &rmi_f54_video_ioctl_ops,
> + .release = video_device_release_empty,
> + .device_caps = V4L2_CAP_TOUCH | V4L2_CAP_READWRITE |
> + V4L2_CAP_STREAMING,
> +};
> +
> +static void rmi_f54_work(struct work_struct *work)
> +{
> + struct f54_data *f54 = container_of(work, struct f54_data, work.work);
> + struct rmi_function *fn = f54->fn;
> + u8 fifo[2];
> + struct rmi_f54_reports *report;
> + int report_size;
> + u8 command;
> + u8 *data;
> + int error;
> +
> + data = f54->report_data;
> + report_size = rmi_f54_get_report_size(f54);
> + if (report_size == 0) {
> + dev_err(&fn->dev, "Bad report size, report type=%d\n",
> + f54->report_type);
> + error = -EINVAL;
> + goto error; /* retry won't help */
> + }
> + f54->standard_report[0].size = report_size;
> + report = f54->standard_report;
> +
> + mutex_lock(&f54->data_mutex);
> +
> + /*
> + * Need to check if command has completed.
> + * If not try again later.
> + */
> + error = rmi_read(fn->rmi_dev, f54->fn->fd.command_base_addr,
> + &command);
> + if (error) {
> + dev_err(&fn->dev, "Failed to read back command\n");
> + goto error;
> + }
> + if (command & F54_GET_REPORT) {
> + if (time_after(jiffies, f54->timeout)) {
> + dev_err(&fn->dev, "Get report command timed out\n");
> + error = -ETIMEDOUT;
> + }
> + report_size = 0;
> + goto error;
> + }
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Get report command completed, reading
> data\n");
> +
> + report_size = 0;
> + for (; report->size; report++) {
> + fifo[0] = report->start & 0xff;
> + fifo[1] = (report->start >> 8) & 0xff;
> + error = rmi_write_block(fn->rmi_dev,
> + fn->fd.data_base_addr + F54_FIFO_OFFSET,
> + fifo, sizeof(fifo));
> + if (error) {
> + dev_err(&fn->dev, "Failed to set fifo start offset\n");
> + goto abort;
> + }
> +
> + error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr +
> + F54_REPORT_DATA_OFFSET, data,
> + report->size);
> + if (error) {
> + dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n",
> + __func__, report->size, error);
> + goto abort;
> + }
> + data += report->size;
> + report_size += report->size;
> + }
> +
> +abort:
> + f54->report_size = error ? 0 : report_size;
> +error:
> + if (error)
> + report_size = 0;
> +
> + if (report_size == 0 && !error) {
> + queue_delayed_work(f54->workqueue, &f54->work,
> + msecs_to_jiffies(1));
> + } else {
> + f54->is_busy = false;
> + complete(&f54->cmd_done);
> + }
> +
> + mutex_unlock(&f54->data_mutex);
> +}
> +
> +static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits)
> +{
> + return 0;
> +}
> +
> +static int rmi_f54_config(struct rmi_function *fn)
> +{
> + struct rmi_driver *drv = fn->rmi_dev->driver;
> +
> + drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
> +
> + return 0;
> +}
> +
> +static int rmi_f54_detect(struct rmi_function *fn)
> +{
> + int error;
> + struct f54_data *f54;
> +
> + f54 = dev_get_drvdata(&fn->dev);
> +
> + error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
> + &f54->qry, sizeof(f54->qry));
> + if (error) {
> + dev_err(&fn->dev, "%s: Failed to query F54 properties\n",
> + __func__);
> + return error;
> + }
> +
> + f54->num_rx_electrodes = f54->qry[0];
> + f54->num_tx_electrodes = f54->qry[1];
> + f54->capabilities = f54->qry[2];
> + f54->clock_rate = f54->qry[3] | (f54->qry[4] << 8);
> + f54->family = f54->qry[5];
> +
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 num_rx_electrodes: %d\n",
> + f54->num_rx_electrodes);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 num_tx_electrodes: %d\n",
> + f54->num_tx_electrodes);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 capabilities: 0x%x\n",
> + f54->capabilities);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 clock rate: 0x%x\n",
> + f54->clock_rate);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F54 family: 0x%x\n",
> + f54->family);
> +
> + f54->is_busy = false;
> +
> + return 0;
> +}
> +
> +static int rmi_f54_probe(struct rmi_function *fn)
> +{
> + struct f54_data *f54;
> + int ret;
> + u8 rx, tx;
> +
> + f54 = devm_kzalloc(&fn->dev, sizeof(struct f54_data), GFP_KERNEL);
> + if (!f54)
> + return -ENOMEM;
> +
> + f54->fn = fn;
> + dev_set_drvdata(&fn->dev, f54);
> +
> + ret = rmi_f54_detect(fn);
> + if (ret)
> + return ret;
> +
> + mutex_init(&f54->data_mutex);
> + mutex_init(&f54->status_mutex);
> +
> + rx = f54->num_rx_electrodes;
> + tx = f54->num_tx_electrodes;
> + f54->report_data = devm_kzalloc(&fn->dev,
> + sizeof(u16) * tx * rx,
> + GFP_KERNEL);
> + if (f54->report_data == NULL)
> + return -ENOMEM;
> +
> + INIT_DELAYED_WORK(&f54->work, rmi_f54_work);
> +
> + f54->workqueue = create_singlethread_workqueue("rmi4-poller");
> + if (!f54->workqueue)
> + return -ENOMEM;
Why do we need dedicated work queue here? As far as I remember Tejun
made works non-reentrant...
> +
> + rmi_f54_create_input_map(f54);
> +
> + /* register video device */
> + strlcpy(f54->v4l2.name, F54_NAME, sizeof(f54->v4l2.name));
> + ret = v4l2_device_register(&fn->dev, &f54->v4l2);
> + if (ret) {
> + dev_err(&fn->dev, "Unable to register video dev.\n");
> + goto remove_wq;
> + }
> +
> + /* initialize the queue */
> + mutex_init(&f54->lock);
> + f54->queue = rmi_f54_queue;
> + f54->queue.drv_priv = f54;
> + f54->queue.lock = &f54->lock;
> +
> + ret = vb2_queue_init(&f54->queue);
> + if (ret)
> + goto remove_v4l2;
> +
> + f54->vdev = rmi_f54_video_device;
> + f54->vdev.v4l2_dev = &f54->v4l2;
> + f54->vdev.lock = &f54->lock;
> + f54->vdev.vfl_dir = VFL_DIR_RX;
> + f54->vdev.queue = &f54->queue;
> + video_set_drvdata(&f54->vdev, f54);
> +
> + ret = video_register_device(&f54->vdev, VFL_TYPE_TOUCH, -1);
> + if (ret) {
> + dev_err(&fn->dev, "Unable to register video subdevice.");
> + goto remove_v4l2;
> + }
> +
> + return 0;
> +
> +remove_v4l2:
> + v4l2_device_unregister(&f54->v4l2);
> +remove_wq:
> + cancel_delayed_work_sync(&f54->work);
> + flush_workqueue(f54->workqueue);
> + destroy_workqueue(f54->workqueue);
> + return ret;
> +}
> +
> +static void rmi_f54_remove(struct rmi_function *fn)
> +{
> + struct f54_data *f54 = dev_get_drvdata(&fn->dev);
> +
> + video_unregister_device(&f54->vdev);
> + v4l2_device_unregister(&f54->v4l2);
Do you need to take care of work[queue] here as well?
> +}
> +
> +struct rmi_function_handler rmi_f54_handler = {
> + .driver = {
> + .name = F54_NAME,
> + },
> + .func = 0x54,
> + .probe = rmi_f54_probe,
> + .config = rmi_f54_config,
> + .attention = rmi_f54_attention,
> + .remove = rmi_f54_remove,
> +};
> --
> 2.5.0
>
Thanks.
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
