Some targets control the ADV7180 power pin via a gpio, so add
support for "pwdn-gpio" device node and pin control.

Signed-off-by: Steve Longerbeam <steve_longerb...@mentor.com>
---
 drivers/media/i2c/adv7180.c | 51 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index b77b0a4..b3bb19f 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
@@ -192,6 +193,7 @@ struct adv7180_state {
        struct media_pad        pad;
        struct mutex            mutex; /* mutual excl. when accessing chip */
        int                     irq;
+       int                     pwdn_gpio;
        v4l2_std_id             curr_norm;
        bool                    powered;
        bool                    streaming;
@@ -442,6 +444,19 @@ static int adv7180_g_std(struct v4l2_subdev *sd, 
v4l2_std_id *norm)
        return 0;
 }
 
+static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
+{
+       if (!gpio_is_valid(state->pwdn_gpio))
+               return;
+
+       if (on) {
+               gpio_set_value_cansleep(state->pwdn_gpio, 1);
+               usleep_range(5000, 5001);
+       } else {
+               gpio_set_value_cansleep(state->pwdn_gpio, 0);
+       }
+}
+
 static int adv7180_set_power(struct adv7180_state *state, bool on)
 {
        u8 val;
@@ -1185,6 +1200,8 @@ static int init_device(struct adv7180_state *state)
 
        mutex_lock(&state->mutex);
 
+       adv7180_set_power_pin(state, true);
+
        adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
        usleep_range(5000, 10000);
 
@@ -1232,6 +1249,34 @@ out_unlock:
        return ret;
 }
 
+static int adv7180_of_parse(struct adv7180_state *state)
+{
+       struct i2c_client *client = state->client;
+       struct device_node *np = client->dev.of_node;
+       int ret;
+
+       ret = of_get_named_gpio(np, "pwdn-gpio", 0);
+
+       if (gpio_is_valid(ret)) {
+               state->pwdn_gpio = ret;
+               ret = devm_gpio_request_one(&client->dev,
+                                           state->pwdn_gpio,
+                                           GPIOF_OUT_INIT_HIGH,
+                                           "adv7180_pwdn");
+               if (ret < 0) {
+                       v4l_err(client, "request for power pin failed\n");
+                       return ret;
+               }
+       } else {
+               if (ret == -EPROBE_DEFER)
+                       return ret;
+               /* assume a power-down gpio is not required */
+               state->pwdn_gpio = -1;
+       }
+
+       return 0;
+}
+
 static int adv7180_probe(struct i2c_client *client,
                         const struct i2c_device_id *id)
 {
@@ -1254,6 +1299,10 @@ static int adv7180_probe(struct i2c_client *client,
        state->field = V4L2_FIELD_INTERLACED;
        state->chip_info = (struct adv7180_chip_info *)id->driver_data;
 
+       ret = adv7180_of_parse(state);
+       if (ret)
+               return ret;
+
        if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
                state->csi_client = i2c_new_dummy(client->adapter,
                                ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1345,6 +1394,8 @@ static int adv7180_remove(struct i2c_client *client)
        if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2)
                i2c_unregister_device(state->csi_client);
 
+       adv7180_set_power_pin(state, false);
+
        mutex_destroy(&state->mutex);
 
        return 0;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to